Ceramic Eyelet Wire Guide

Ceramic Eyelet Wire Guide
Ceramic Eyelet Wire Guide
Ceramic Eyelet Wire Guide
Request a Quote

Application
The coil winding machine ceramic eyelet is a frequently used as a wire guide in a variety of winding machinery and textile machinery.

Features
(1) When the enameled wire moves through the surface of the ceramic eyelet inside the coil winding machine, it requires a relatively small friction force, allowing the wire passage to be smoother. Because of that, we carry out ultra-fine polishing on the ceramic eyelet, with a polishing accuracy of up to Ra 0.2, thus significantly reducing the risk of damage to the enameled wire.
(2) As a wire guiding component, the ceramic will eventually become worn through the friction with the enameled wire. In order to improve the service life, we use AL2O3 as the material, with a purity of 99%, a density of 3.85g/cm2, and a hardness of more than HRC88, thus improving the wear resistance.

Specification introduction
Specification Total length L Minor diameter L1 Major diameter D Minor diameter D1 Hole diameter of the wire outlet d1 Hole diameter of the wire inlet d2
W0202-2005-1505 15 5 2 0.5 0.2 0.2
W0202-2000-3300 33 * 2 * 0.2 0.2
W0202-3010-3015 30 15 3 1 0.2 0.2
W0202-3006-3010 30 10 3 0.6 0.2 0.2
W0202-3015-3015 30 15 3 1.5 0.2 0.2
W0202-3007-3508 35 8 3 0.7 0.2 0.2
W0303-3008-3012P 30 12 3 0.8 0.3 0.3
W0303-3012-3519 35 19 3 1.2 0.3 0.3
W0303-3008-4506 46 6 3 0.8 0.3 0.3
W0303-3020-3515 35 15 3 2 0.3 0.3
W0303-0800-3500 35 * 0.8 * 0.3 0.3
W0303-3018-4018 40 18 3 1.8 0.3 0.3
W0404-3010-3009 30 9 3 1 0.4 0.4
W0404-3007-4528 45 28 3 0.7 0.4 0.4
W0505-3012-4506T 45 6 3 1.2 0.5 0.5
W0606-3012-3520 35 20 3 1.2 0.6 0.6
W0606-3016-4010T 40 10 3 1.6 0.6 0.6
W0808-3018-3518 35 18 3 1.8 0.8 0.8
W0808-3018-3010 30 10 3 1.8 0.8 0.8
W1212-3022-3010 30 10 3 2.2 1.2 1.2
Related products
Send Message
Other Products
Inquiry
Inquiry