Extrusion Press (for Φ170mm Rod)
Extrusion Machine for Aluminum Rod, Rod Extrusion Equipment, Rod Extruder
Indirect extrusion press is different from direct extrusion press. The hollow ram is outfitted with a die and drives the stationary metal billet at a reverse direction. Finally, the extruded aluminum parts will come out from the hollow ram.
Main characteristics of Extrusion Machine for Aluminum Rod
1. No friction or heat.
2. 25%-30% extrusion force less.
3. This rod extrusion press is applicable for profiles with a smaller cross sectional area. Plus, it can work under low temperature and at a high speed.
4. The rod extruder ensures uniform aluminum flow, small extrusion hole and low residual pressure, all allowing for reliable and excellent mechanical performance of extruded products.
| Model (Al) | Rated pressure (MPa) | Size of standard aluminum billet (mm) | Max. circumcircle of profile (mm) | Max. width of profile (mm) | Size of die (mm) | Central height of machine (mm) | Total power (kW) | |
| Metric ton | Short ton | |||||||
| 25 | Φ305×1220 | Φ170 | 170 | Φ315×150 | 1900 | 750 | ||
Applications
Home decoration, bridge construction, photovoltaics support, road transport, etc.
Notes
1. Limited by the hollow raw, the applied load cannot exceed a certain range.
2. Limited by the size of die, profiles with complex cross section cannot be processed.
