Made of bearing steel, GZB roller linear guide is composed of rail, slide block, rollers, reverse unit, retainer, roller cage, and seal gasket, etc. The roller linear guide has high rigidity rollers and its load bearing pattern is changed from the traditional point contact to line contact. The roller linear guide can withstand a large torque due to its inner V type groove design. In addition, the structure of slide block is optimized by finite element analysis. All of this contributes to the high load carrying capacity of our roller linear guide. Moreover, the contact angle between the roller and raceway is 45º, enabling the roller linear guide to have equal load in four directions.

Roller cage is set among rollers to keep them apart and avoid collision, eliminating any noise caused by roller collision. It also makes the rollers move straight and stably. There is an oil layer between roller and the cage which greatly reduces friction and reduces heat generated by the linear guide during moving, ensuring high speed and high accuracy motion. What's more, with lubricating grease stored in the cage, the roller linear guide is free from maintenance for a long period of time and the operating life is extended. These are a few reasons why our roller linear guide is widely used for machining centers, NC lathes, grinders, etc.

• ①Type code of four direction equal load ball guide
• ②Nominal dimension of rail
• ③Code of block width (A for wide (flange) type, B for narrow type)
• ④Mounting hole of block (A for thread hole, B for through hole)
• ⑤Code of block length (standard is not specified, L for lengthen)
• ⑥Code of special requested block (standard is not specified)
• ⑦Seal type
• ⑧Number of blocks used per rail
• ⑨Preload, total P₀, P₁, P, P₃
• ⑩Number of rails used in the same surface
• ⑪ Rail length
• ⑫ Number of joint guide (non joint is not specified)
• ⑬ Accuracy grade, total 1, 2, 3, 4, 5, 6 grades

Type	Dimension of assembly		Dimension of block												Dimension of rail
	H	W	B1	B3	K	T	T1	M	Ф	L0	L1	L2	L3	L4	B2	H1	d × D × h
GZB25AA GZB25AAL	36	23.5	70	57	31.5	9.5	10	8	6.8	10	100 120	66 86	45	40	23	24	7 ×11×9
GZB35AA GZB35AAL	48	33	100	82	42	13	21	10	8.5	12	128 147	86 105	62	52	34	30.5	9 ×14×12
GZB45AA GZB45AAL	60	37.5	120	100	51	15	25	12	10.5	15	154 182	102 130	80	60	45	38	14 ×20×16
GZB55AA GZB55AAL	70	43.5	140	116	60	20	29	14	12.5	18	172 210	118 156	95	70	53	44	16 ×23×20
GZB65AA GZB65AAL	90	53.5	170	142	76	25	37	16	14.5	23	210 270	147 207	110	82	63	55	18 ×26×22
GZB85AAL	110	65	215	185	95	24	44	20	17.5	26	350	254	140	140	85	73	24 ×35×28
GZB100AAL	120	75	250	220	105	25	51.5	20	17.5	30	395	286	200	200	100	80	26 ×39×32
GZB125AAL	160	97.5	320	270	135.5	30	65	24	21	45	491	360	205	205	125	115	33 ×48×45

		Dimensions of Oil Cup			Dynamic Load Rating	Static Load Rating	Torque Rating			Weight of Block	Weight of Rail
F	Max. single length	G	P	N	C(KN)	CO(KN)	MA(Nm)	MB(Nm)	MC(Nm)	Kg	Kg/m
30	6000	M6	12	5.5	26.5 33.8	50.8 71.6	570 830	570 830	710 980	0.6 0.8	3.2
40	6000	M6	13	8.5	50.5 61	121 162	1548 2708	1548 2708	2343 3283	1.6 2.0	5.9
52.5	6000	M8 ×1	14	11	84.5 99.6	191 236	3156 5560	3156 5560	4858 6736	2.5 3.5	9.8
60	6000	M8 ×1	14	13	123 154	292 390	5267 9713	5267 9713	8243 11927	4.3 5.9	13.3
75	6000	M8 ×1	14	17	192 248	451 613	10823 20808	10823 20808	17762 22957	8.6 12.3	20.3
90	6000	M8 ×1	14	21	460	1050	45600	45600	51420	21.6	35.2
105	6000	M10 ×1	16	23	547	1330	61200	61200	73140	31.5	46.8
120	6000	M10 ×1	16	23	1040	1924	123176	123176	114438	65.5	84.6

NOTE

• L dimensions are based on MN seal type. For details please see seal type.
• AA/AAL blocks of GZB series are flange type and top mounting holes are thread holes, up-lock see dimension M, down-lock see dimension Ф.
• On the top of GZB85, GZB100 or GZB125 block, three rows of mounting holes, 9 holes in total, are symmetrically distributed in the L3, B3 directions.
• Please let us know if you need oiling from the side surface.

Model	Dimensions of Assembly		Dimensions of Block								Dimensions of Rail
	H	W	B1	B3	K	T	M × L0	L1	L2	L3	B2	H1	d × D × h
GZB25BA GZB25BAL	40	12.5	48	35	35.5	9.5	M6 × 8	100 120	66 86	35 50	23	24	7 ×11×9
GZB35BA GZB35BAL	55	18	70	50	49	10	M8 × 12	128 147	86 105	50 72	34	30.5	9 ×14×12
GZB45BA GZB45BAL	70	20.5	86	60	61	15	M10 × 16	154 182	102 130	60 80	45	38	14 ×20×16
GZB55BA GZB55BAL	80	23.5	100	75	70	18	M12 ×1 8	172 210	118 156	75 95	53	44	16 ×23×20
GZB65BA GZB65BAL	90	31.5	126	76	76	23	M16 × 16	210 270	147 207	70 120	63	55	18 ×26×22
GZB85BAL	110	35.5	156	100	95	30	M18 × 25	350	254	140	85	73	24 ×35×28
GZB100BAL	120	50	200	130	105	33	M20 × 27	395	286	200	100	80	26 ×39×32
GZB125BAL	160	57.5	240	184	135.5	40	M24 × 30	491	360	205	125	115	33 ×48×45

		Dimensions of Oil Cup			Dynamic Load Rating	Static Load Rating	Torque Rating			Block Weight	Rail Weight
F	Max. single length	G	P	N	C(KN)	CO(KN)	MA(Nm )	MB(Nm )	MC(Nm )	kg	Kg/m
30	6000	M6	12	9.5	26.5 33.8	50.8 71.6	570 830	570 830	710 980	0.5 0.7	3.2
40	6000	M6	13	15.5	50.5 61	121 162	1548 2708	1548 2708	2343 3283	1.4 1.7	5.9
52.5	6000	M8 ×1	14	21	84.5 99.6	191 236	3156 5560	3156 5560	4858 6736	2.48 3.2	9.8
60	6000	M8 ×1	14	23	123 154	292 390	5267 9713	5267 9713	8243 11927	3.8 5.1	13.3
75	6000	M8 ×1	14	17	192 248	451 613	10823 20808	10823 20808	17762 22957	6.3 8.9	20.3
90	6000	M8 ×1	14	21	460	1050	45600	45600	51420	14.7	35.2
105	6000	M10 ×1	16	23	547	1330	61200	61200	73140	24.5	46.8
120	6000	M10 ×1	16	23	1040	1924	123176	123176	114438	46	84.6

NOTE

• L dimensions are based on MN seal type. For details please see seal type.
• BA/BAL blocks of GZB series are narrow-high type and top mounting holes are thread holes.
• There are three rows, a total of 9 mounting holes on the top of GZB85, GZB100,GZB125 block. The holes are symmetrically distributed in the top L3, B3 directions.
• Please let us know if you need oiling from side surface.

As a specialized roller linear guide manufacturer and supplier based in China, we also provide radial linear guideway, convex linear motion spline, CNC cast iron worktable, mini ball screw, and much more.