30V 5A Hot Air Soldering Rework Station with DC Power Supply, Item WEP-853D
Request a Quote
Description
The WEP-853D hot air soldering station is designed to carry out various treatments, including heat shrinkage, drying, pain removal, thawing, debonding, reheating, and rubber welding on different electronic components. It is integrated with a 30V/5A DC current, hot air gun and soldering iron. The control panel features an aluminum panel and the DC current display can be switched between mA/A.
Parameters | |||
Rated voltage | AC 220V±10% 50Hz | ||
power | ≤1000W | ||
300℃The thermostat power of (high-speed PID programmable energy saving) | 250W±10% | ||
Working environment | 0~40℃ relative humidity<80% | ||
Storage environment | -20~80℃ relative humidity<80% | ||
Body size | 255*188*125mm | ||
Weight | 7.26KG |
Parts parameters | Hot air gun | Soldering iron | |
Work voltage | AC 220V±10% 50Hz | AC 26V±10% 50Hz | |
Output power | 720W | 75W | |
Temperature range | 100℃~480℃ | 200℃~480℃ | |
Airflow type | Brushless fan | --- | |
Air Flow | 120L/min(MAX) | --- | |
Temperature Stability | ±1℃ (Static) | ±1℃ (Static) | |
Display Type | Red LED display | red LED display | |
Temperature correction type | The PID digital program proofreading | The PID digital program proofreading | |
PID Temperature correction cycle | rapidly 20ms | high-speed 100ms | |
Heating elements | Ceramic skeleton heater | Imported heater | |
Standard nozzles/tips | (10mm,8mm,5mm,13mm) 4 PCS nozzles | B | |
Tip ground impedance | --- | <2Ω | |
Tip of ground voltage | --- | <2mV |
DC power supply | |||
Output voltage | 0~30V | ||
Output current | 0-5A adjustable | ||
Protection type | Short-circuit over-current | ||
Voltage/ Current display type | red LED display | ||
Load stability | < 0.01±2mv | ||
Ripple dB | < 1mvrms (virtual value) |
- PID controller used for the real-time tracking of the air gun temperature and soldering iron temperature with high-speed 100ms cycle, and auto corrects the temperature with high stability.
- High precision DC power supply: Output voltage: Adjustable between 0-30V DC, Output Current: Adjustable between 0-5A. The power supply is protected from overloading with high precision and reliability.
- The power port comes with a voltmeter instead of using exterior precision digital voltmeter.
- Handle protection function, the air gun and soldering iron handles have to be placed on the holder when powering on the rework station to begin normal functioning. The main reason is for safety if the handles are misplaced in dangerous locations.
If you need quick after-sales support
Please don't hesitate to send an email to !
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos