Electromagnetic Pulse Valve

Electromagnetic Pulse Valve
Electromagnetic Pulse Valve
Electromagnetic Pulse Valve
Electromagnetic Pulse Valve
Electromagnetic Pulse Valve
Request a Quote

Filtertex has the ability to produce and manufacture 5 types of electromagnetic pulse valves, including the DCF-Z right-angle type, DCF-Y embedded type, DCF-ZM screw type, DMY-II-80 type and DCF-6L-B type.

The operation of the electromagnetic pulse valve depends on the working conditions of the unloading valve in the signal control valve body. The moment the pulse valve is opened, a strong airflow is released from the valve to achieve effective and instantaneous blowing. Our electromagnetic pulse valves are respected and widely recognized by both domestic and international clients due to their outstanding cleaning capacity and a diaphragm service life of up to 1 million uses. With standard installation, correct operation and consistent maintenance, the electromagnetic pulse valve has a service life of 3 to 5 years. According to specific working conditions, Filtertex can also produce customized pulse valves, including high temperature pulse valves, anti-corrosion pulse valves and explosion resistant pulse valves.

1. DMF-T Electromagnetic Pulse Valve As an embedded valve, the DMF-T electromagnetic pulse valve can be installed directly into gas bags, providing a direct blowing performance with very low air loss. It is suitable for environments with a wide range of air pressure.
Working pressure: 0.3-0.6Mpa
Working media: Clean air
Working voltage: DC24V/AC220V
Working current: 800mA/60mA
Working environment: 10℃~55℃ (The relative temperature should be less than 85%)
Diaphragm lifespan: 1 million times or 2-3 years

2. DCF-2L-B Right Angle Type Electromagnetic Pulse Valve In the DCF-2L-B pulse valve, the angle between the air inlet and outlet is 90 degrees significantly simplifying the installation of the air reservoir and dust filtration pipes. This type of pulse valve is used to provide a smooth airflow for dust cleaning.

3. DCF-Y-102S Embedded Electromagnetic Pulse Valve This type of pulse valve is known for its low resistance, strong blowing performance, wide pressure range and smooth airflow, making it suitable for areas with a wide air pressure range.

4. Screw-type Electromagnetic Pulse Valve Our screw-type electromagnetic pulse valve offers a strong counter blowing air to remove dust and powder on filter bags and achieve a high cleaning efficiency.

Send Message
Other Products
Inquiry
Inquiry