Mobile Phone Middle Frame Laser Marker
This kind of laser marker adopts UV marking and engraving technology and produces matte effect, allowing for high quality light beam, fast processing speed and nice mark. After it appeared on the market, many large-scale cellphone manufacturers chose it and gave high recognition.
Features of Middle Frame Laser Marker
1. The laser marking machine is equipped with an imported high-speed water-cooling digital scanning system, in-house developed 3D software and control system, thus requiring only 13 seconds to finish a 4.7-inch phone screen.
2. Due to a special folded cavity structure, the middle frame laser marker has high-quality light beam and small light spot, which thereby ensures fine mark quality, with high uniformity and no textures.
3. With a low reflectivity, the laser marking system has little laser loss and outputs high effective power.
4. The laser source is specially customized in order for strong power, high peak value and wide frequency range. It's an ideal machine for stable mass production of multicolor cellphone middle frames.
5. The in-house developed software realizes 3D engraving and signally improves the processing speed.
| Model | CK-LEG |
| Laser power | 100 W |
| Peak power | 325 W |
| Pulse frequency | 2-100KHz |
| Laser grade | 4 |
| Beam quality | m²＜1.2 |
| Mini line width | 0.1mm |
| Marking speed | ≤10000mm/s |
| Marking range | 250mm ×250 mm |
| Average consumption | 3000W |
| Input power | 220V/50Hz |
| Cooling system | Constant-temperature cooling unit |
| Environmental requirements | Temperature15-35℃/ Humidity30-80% |
| Size of machine | 827.5mm×874mm×1542.6mm |
| Size of control cabinet | 650mm×650mm×882mm |
| Size of chiller | 400mm×485mm×900mm |
| Positioning precision | 0.05º |
| Rotating precision | 0.03mm |
