CNC V-Grooving Machine, HRK-Series

CNC V-Grooving Machine, HRK-Series
CNC V-Grooving Machine, HRK-Series
CNC V-Grooving Machine, HRK-Series
Request a Quote
Website:

  • Technical Specifications:

    Technical sheets
    Max. width of steel sheet to be notched 1250mm 1250mm
    Max. length of steel sheet to be notched 4000mm 3200mm
    Max. thickness of steel sheet to be notched 6mm(plate flatness< 3mm)
    6mm(flatness of steel sheet< 3mm)    		 6mm(plate flatness< 3mm)
    6mm(flatness of steel sheet< 3mm)
    Min. thickness of steel sheet to be notched 0.2mm 0.2mm
    Max. distance of the beam movement (backward and forward) 1220mm 1220mm
    Min. distance of V-groove edge 15mm 15mm
    Max. distance of tool carrier movement (upward and downward) (in the direction of axle Z) 50mm 50mm
    Resolution of tool carrier movement (upward and downward) (in the direction of axle X) 4300mm 4300mm
    Cutting speed 15m-60m/min 15m-60m/min
    Min. setting unit of axle Y 0.001mmmm 0.001mmmm
    Positioning precision of axle Y ±0.02mm ±0.02mm
    Min. setting unit of axle Z 0.001mm 0.001mm
    Positioning precision of axle Z ±0.02mm ±0.02mm
    Pressure range of gas circuit 0.4-0.6mpa 0.4-0.6mpa
    Gross weight 9500kg 8000kg
    Dimension 5700*2200*2300(mm) 500*2200*2300(mm)

    Product Details:

    Features:

    • Compact Structure
      HRK series CNC metal grooving machine features compact structure, reliable performance, easy operation and no deformation forever.
      The structure consists of three sets of servo motor drive system, pneumatic clamping system and main steel frame.
    • Y-axis System
      The Y-axis system of the machine is composed of ECMA-F20830 main motor, AC servo motor, planetary reducer timing belt and timing wheel, high-precision gear rack, linear guide rail and more.
      The function of servo motor is to drive the cutter seat through planetary reducer to make rectilinear motion on the linear guide rail.
    • X-axis System
      The X-axis system is composed of E21320 servo motor, timing belt, timing wheel, ball screw, linear guide rail, backgauge rack, clamping tool and more. The motor drives ball screw and backgauge rack to make rectilinear motion on the guide rail, and provide the accurate positioning for the backgauge mechanism.
    • Z-axis System
      The Z-axis system is composed of C20604 servo motor, timing belt, timing wheel, ball screw, cutter holder and so on. Its function is to drive the ball screw and cutter seat make rectilinear motion through timing belt and timing wheel, and provide precise positioning for the tool holder.
    • Pneumatic System
      HRK series CNC metal grooving machine features compact structure, reliable performance, easy operation and no deformation forever.
      The structure consists of three sets of servo motor drive system, pneumatic clamping system and main steel frame.
    • Electrical Control System
      The electrical control system is composed of PLC, actuator, touch screen, electric control element, electrical cabinet, etc. The electrical cabinet is installed in the side wall of the machine, which has convenient maintenance and high protection performance. Any work can be realized by controlling the touch screen.

    Safety Identifiers:

    • Safety standards (2006/42/EC)
    • Power will be cut off when door opens
    • Foot switch (safety grade: 4)
    • Rear metal safeguard, CE standard
    • Safety relay monitors foot switch, safety protection

    CNC Controller:

    • Low maintenance cost
    • Shorten training time
    • Avoid collision
    • Responsive time for acceleration/deceleration: 0.5US
    • High-speed positioning of main shaft
    • Retract function
    • Intelligent fault alarm and troubleshooting function
    • PLC interrupt function with the fixed scan time of 10ms
    • Open-loop control with feedback function
    • The servo motor torque can be read and displayed
    • The acceleration and deceleration control curve is superior to other numerical control
    • DC power input module
    • SSR external input signal plate
    • Easy wiring and low wiring cost

    Standard Configurations:

      1. HRK series grooving machine features
        compact structure, reliable performance, frame structure, and non-deformation.
      1. Taiwan HUST controller
      1. Tool carrier can hold 3 tools at the same time. The maximum cutting depth is 1mm, which is 5 times of the efficiency of traditional equipment, and the return speed is also 5 times faster.
      1. Pneumatic Feeding clamp
        Pneumatic material clamping device
      1. X, Y and Z axis all are equipped with Japan Panasonic servo motors.
      1. Taiwan YYC gear-rack drive
      1. Schneider Electrics
      1. Taiwan AIRTAC air valve
      1. Taiwan AIRTAC cylinder
      1. Front photoelectric safety protection

    Sample Display:

Leave Message
Manufacturer Advertising
Similar Manufacturies and Parts
Inquiry
Inquiry