Anchor Drilling Rig, Type MGJ-50
Request a Quote
Anchor drilling rig, type MGJ-50 is applicable in constructions site with limited area. It is mainly used in rock anchoring, retaining wall reinforcement, landslides prevention, rock collapsing and other disaster remediations as well as underground engineering supporting and drilling for foundation of high-rise buildings.
ParametersBasic parameters | Drilling depth | 60~30m | ||||
Drilling diameter | Φ110~Φ180mm | |||||
Diameter of drilling pipe | Depends on the choices on drilling hole | |||||
Power head | Low speed type | 1st gear | 2nd gear | 3rd gear | 4th gear | Reverse gear |
Rotational speed output (clockwise and counter clockwise) | 32r/min | 59r/min | 108r/min | 187r/min | 26r/min | |
Rated maximum torque output | 2800 N.m | |||||
Up down feeding stroke of the power head | 1200/1500/2300mm | |||||
High speed type | 1st gear | 2nd gear | 3rd gear | 4th gear | Reverse gear | |
Rotational speed output (clockwise and counter clockwise) | 59r/min | 110r/min | 200r/min | 343r/min | 48r/min | |
Rated maximum torque output | 2800 N.m | |||||
Up down feeding stroke of the power head | 1200/1500/2300mm | |||||
Power | Electric engine model | Y160M-4 | ||||
Power | 11KW | |||||
Rotational speed | 1455r/min |
- Drilling angle in one plane: drilling angle at any angle of the vertical elevation angle (180°) with electric motor.
- Drill rig has spindle stroke of length 2300mm, spindle stroke for short mast reaching 1500mm and stroke of 1200mm for an ultra-short mast according to the requirements of constructions.
- Suitable in small area construction. Impact rotary drilling is used mainly as it has high drilling efficiency.
- Mast is raised or lower with power head. Its structure is simple, safe and reliable.
- The drill rig base comes in sled or wheel type to cater our customers' preference.
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos