Hydraulic Anchor Drilling Rig, Type MGY-100BL
Request a Quote
This product has been discontinued and removed from our shelves.
IntroductionsHydraulic anchor drilling rig, type MGY-100BL widely applicable in pit foundation support, constructions with anchor rod and anchor cable, pipe roofing, grouting jet and other construction fields.
ParametersBasic parameters | Drilling depth | 150 ~40m | |
Drilling diameter | Φ110~Φ400mm | ||
Power head | Low speed | 1st gear | 2nd gear |
Rotational speed output (clockwise and counter clockwise) | 35r/min | 70r/min | |
Rated maximum torque output | 6500 N.m | ||
Up down feeding stroke of the power head | 1900mm | ||
High speed | 1st gear | 2nd gear | |
Rotational speed output (clockwise and counter clockwise) | 70r/min | 140r/min | |
Rated maximum torque output | 3750 N.m | ||
Up down feeding stroke of the power head | 1900mm | ||
Power | Electric engine model | Y200L-4 | |
Power | 30KW | ||
Rotational speed | 1470r/min |
- High efficiency. The drill rig uses large hole hydraulic chuck structure and installation of 6m drill pipe is available to improve the work efficiency.
- Its movements are handled by crawler track with the addition of 400mm up down moving adjustment of the drilling rig mast, the time taken for hole positioning can be reduce greatly.
- It is designed with clamper as well as installing and uninstalling device. Through cooperate works with power head and chuck, the labor intensity can be reduced greatly.
- The drill rig has strong adaptability. As the drill rig equipped with large through-hole hydraulic chuck structure that has through-hole with Φ110mm diameter, no modification is needed on the power head to use together with single, double or triple drilling pipe. This satisfy the requirements of jet grouting, reverse circulation drilling and drilling for Φ108mm steel pipe roofing.
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos