Carbide Cutting Tools
CGEG produces carbide products used for cutting machining, geological drilling, oil and coal exploitation and construction engineering as well as wear and corrosion resistant carbide parts used in machinery and chemical industries. Our products show high hardness and wear resistance and can keep formal performance when working at high temperature.
CustomizationWe have over 20 grades and thousands of specifications of products that can be selected. We can also customize products with various components and sizes according to customers' demands, which can meet the requirements of non-standard products.
MaterialsTungsten-carbide powder, cobalt powder
Parameters| Grade | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | |
| YG3 | 1078 | 91 |
YG3 carbide products are suitable for the finish turning, semi-finish turning and small section finish turning of cast iron, nonferrous metals and their alloys, and non-metallic materials during continuous cutting. They can be used for finish threading, reaming and cutting glass. Besides, they can also be used for wet lubrication stretching of steel, nonferrous metals and their alloy wires and the boring of non-metallic materials.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YG3X | K01 | 1078 | 91.5 |
YG3X carbide products are suitable for the finish machining of cast iron, nonferrous metals and their alloys. They can also be used for the finish machining of alloy steel, quenched steel, wire drawing die and geological acicular alloy.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YG4C | 1421 | 89.5 | |
YG4C carbide products are suitable for homogeneous and complete rock formation exploration, coal cutter bit drilling, coalfield geology and oil well drilling.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YG6A | K10 | 1372 | 91.5 |
YG6A carbide products are suitable for machining of hard cast iron, nonferrous metals and their alloys and can also be used for semi-finish machining of high manganese steel and quenched steel. Besides, they can be used for manufacturing of medium load drawing dies.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YG6X | K05 | 1372 | 91 |
YG6X carbide products are suitable for machining of chilled cast iron and heat resisting alloys. They can be used for the manufacturing of artificial diamond anvils, which shows good effect, and medium load drawing dies.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YG6 | K20 | 1421 | 89.5 |
YG6 carbide products are suitable for the rough turning of cast iron, nonferrous metals and their alloys during continuous cutting and semi-finish turning during intermittent cutting.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YG8N | K25 | 1470 | 89.5 |
YG8N carbide products are suitable for the rough machining of hard cast iron, ductile ironand nonferrous metals. They can also be used for the rough machiningand semi-finish machining of stainless steel.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YG8 | K30 | 1470 | 89 |
YG8 carbide products are suitable for the machining of cast iron, nonferrous metals, non-metallic materialsand stainless steel. Meantime, they can also be used for geological exploring tools, artificial diamond anvils and other wear-resistant parts.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YG8C | 1715 | 88 | |
YG8C carbide products are suitable for percussive drills used bits and used to drill medium hard and hard rock formations. They can be manufactured into oil well drill bits and coal cutter bits which are used to cut coal rake containing hard rocks. They can also be applied for drawing steel tubes and steel rods with high compression ratio.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YG11C | G20 | 2058 | 86.5 |
YG11C carbide products are suitable for heavy drills used bits to drill hard rock formations. They can also be used for drawing dies of steel tubes and steel rods with high compression ratio and stamping dies.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YG15 | G30 | 2058 | 87 |
YG15 carbide products are suitable for artificial diamond pressure cylinders, drill bits, drawing dies of steel tubes and steel rods with high compression ratio and stamping dies.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YG20 | G40 | 2254 | 85 |
YG20 carbide products are suitable to be made into stamping dies used in conditions of high impact load and large stress ( such as dies and tools of trimming, cutting, boring, extending and upsetting).
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YG20C | 2254 | 84 | |
YG20C carbide products are suitable for manufacturing large size extended molds and upsetting dies.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YT5 | P30 | 1372 | 89.5 |
YT5 carbide products are suitable for the rough machining, intermittentturning, milling, planing and drilling of steel products.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YT14 | P20 | 1176 | 90.5 |
YT14 carbide products are suitable for the rough turning of steel products uneven end during continuous cutting, semi-finish turning of uneven end during intermittentcutting and the rough milling and whirlwind milling of continuous end.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YT15 | P10 | 1127 | 91 |
In carbon steel and alloy steel machining, YT15carbide products are suitable for the rough turning, semi-finish turning and finish turning during continuous cutting, small section finish turning, whirlwind turning during intermittent cutting, semi-finish milling and finish milling of continuous end, rough reaming and finish reaming of holes.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YT30 | P01.2 | 882 | 92.5 |
YT30 carbide products are suitable for the finish machining of carbon steel and fine steel workpieces, such as small section finish turning, fine boring and fine reaming.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YW1 | M10 | 1176 | 91.5 |
YW1 carbide products are suitable for the machining of intractable steel materials such as heat resistant steel, high manganese steel and stainless steel, ordinary steel materials and cast iron.
| Grade | Equivalence (ISO) | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | ||
| YW2 | M20 | 1323 | 90.5 |
YW2 carbide products are suitable for the machining of very intractable steel materials such as heat resistant steel, high manganese steel, stainless steel and high-grade alloy steel, ordinary steel materials and cast iron.
| Grade | Physical and Mechanical Properties | |
| Bending Strength ≥N/mm2 | Hardness ≥HRA | |
| 816 | 1470 | 92 |
816 carbide products are suitable for the machining of tempered alloy steel and quenched steel.
