JX Thermocouple Extension Wire(Fiberglass Insulated Wire 2x7/0.2mm)
Our fiberglass insulated JX thermocouple extension wire (2×7/0.2mm) comes with SSB overall sheath and braided fiberglass insulation layer. The other parameters of this thermocouple component are also detailed below. Welcome to contact us for any questions about our products.
Material
1. Conductors
Positive: iron
Negative: constantan
2. Insulation: fiber glass
3. Overall sheath: SSB
1. Subject
This specification is for our fiberglass insulated JX thermocouple extension wire (2×7/0.2mm), which comes with stranded wire and standard tolerance.
A. Conductor
Standard thermocouple extension wire
| Conductor size (AWG) | Quantity of strands and gauge |
| 24mm | 7/0.2mm |
B. Insulation
Braided fiberglass (400℃)
Nominal insulation thickness: 0.18±0.2mm
Color code:
Positive: black
Negative: white
C. Assembly
The two conductors (positive and negative) of the fiberglass insulated JX thermocouple extension wire (2×7/0.2mm) are in parallel.
D. Overall sheath
Silicone rubber (200℃)
Nominal sheath thickness: 1.0mm±0.2
Color code: blue
E. Metal overbraid
Material: stainless steel round wire braided with blue tracer
Minimum coverage: 85%
3. Dimensions and Tolerance
Dimensions/tolerance (mm): Ø5.0±0.2
| Temperature range | Standard tolerance* | Special tolerance* |
| 0℃ - 400℃ | ±2.2℃ or 0.75% | ±1.1℃ or 0.4% |
* whichever is greater
Thermocouple type available: KX, JX, TX, EX, NX, RX,SX and other compensating cable like KCA, KCB and so on.
