General Purpose Silicone Rubber for Molding
Request a Quote
Applications
This high consistency rubber (HCR) is suitable for molding of O-rings, washers, gaskets, etc.
Features
- Rapid vulcanization;
- Easy de-molding;;
- Good resilience;;
- Suitable for mechanical edge finishing;
Approvals
ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, siloxane testing, etc.
Test
50% DBPMH (2,5-Dimethyl-2,5-di-(tert-butylperoxy) hexane), addition 1%, 175℃×5min×15Mpa
Technical Data
- Model:
HT-8105 - Appearance: Translucent
- Processability: 50-100
- Hardness (Shore A): 6
- Density (g/cm3): 1.12
- Tensile strength (Mpa): 5
- Elongation (%): 700
- Tear strength (K N/m): 6
- Model:
HT-8110 - Appearance: Translucent
- Processability: 80-120
- Hardness (Shore A): 10
- Density (g/cm3): 1.13
- Tensile strength (Mpa): 6
- Elongation (%): 750
- Tear strength (K N/m): 12
- Model:
HT-8120 - Appearance: Translucent
- Processability: 120-150
- Hardness (Shore A): 20
- Density (g/cm3): 1.14
- Tensile strength (Mpa): 7
- Elongation (%): 650
- Tear strength (K N/m): 15
- Model:
HT-8130 - Appearance: Translucent
- Processability: 200-200
- Hardness (Shore A): 30
- Density (g/cm3): 1.12
- Tensile strength (Mpa): 7
- Elongation (%): 850
- Tear strength (K N/m): 15
- Model:
HT-8140 - Appearance: Translucent
- Processability: 220-240
- Hardness (Shore A): 40
- Density (g/cm3): 1.13
- Tensile strength (Mpa): 7
- Elongation (%): 750
- Tear strength (K N/m): 20
- Model:
HT-8150 - Appearance: Translucent
- Processability: 220-240
- Hardness (Shore A): 50
- Density (g/cm3): 1.14
- Tensile strength (Mpa): 7
- Elongation (%): 650
- Tear strength (K N/m): 15
- Model:
HT8160 - Appearance: Translucent
- Processability: 230-260
- Hardness (Shore A): 60
- Density (g/cm3): 1.15
- Tensile strength (Mpa): 7
- Elongation (%): 550
- Tear strength (K N/m): 15
- Model:
HT-8170 - Appearance: Translucent
- Processability: 260-280
- Hardness (Shore A): 70
- Density (g/cm3): 1.2
- Tensile strength (Mpa): 7
- Elongation (%): 450
- Tear strength (K N/m): 15
- Model:
HT-8180 - Appearance: Translucent
- Processability: 250-280
- Hardness (Shore A): 80
- Density (g/cm3): 1.2
- Tensile strength (Mpa): 7
- Elongation (%): 300
- Tear strength (K N/m): 15
- Model:
HT-8190 - Appearance: Translucent
- Processability: 260-290
- Hardness (Shore A): 90
- Density (g/cm3): 1.22
- Tensile strength (Mpa): 7
- Elongation (%): 200
- Tear strength (K N/m): 15
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
