Hydraulic Rock Bolting Rig, KM211
Request a Quote
- Dimensions (L×W×H): 10700×2000×1500/2000mm
- Weight: 12000kg
- Gradeability: 14°
KM211 hydraulic rock bolting rig is specially designed for handling different bolt types such as friction bolts and resin bolts in underground mines and tunnels at low heights. The rock bolting rig can pass through tunnels with cross section of 2m in width and 2.5 in height, and rock bolting operation can be implemented in tunnels with cross section at width greater than 2.5m and height greater than 2m.
Dimensions and Weight | ||
Length | 10700mm | |
Width | 2000mm | |
Height | 1500/2000 mm | |
Weight | 12000 kg | |
Travelling speed, level | 10 km/h | |
Gradeability | 14° | |
Safe protection | ||
Noise level | < 100 dB(A) | |
Lifting safety roof | Meet the requirements of FOPS and ROPS. | |
Drilling system | ||
Drilling | Bolt | |
Rock drill (drifter) | 1×HC25/R32 | 1×HC25/R32 |
Impact power | 8kW | 8kW |
Impact flow | 65L/min | 65L/min |
Impact pressure | 150bar | 150bar |
Max. rotary pressure | 175bar | - |
Impact frequency | 55-65hz | 55-65hz |
Torque | 325Nm | - |
Hole diameter | 32-51mm | - |
Beam rotation | 360° | |
Feed extension | 480mm | |
Height of tunnel | Bolt rod leght 1500mm | |
Model of boom | K26F | |
Form of boom | Automatic leveling | |
Extension of drill boom | 1200mm | |
Electric hydraulic pump unit | ||
Electric motor | 45kW | |
Impact/Feed/Positioning | Variable axial piston pump | |
Turn around | Gear pumps | |
Filter precision | 10μ | |
Hydraulic oil tank | 240L | |
Hydraulic cooler | Water cooler | |
Working pressure | 380V | |
Frequency | 50Hz | |
Starting method | Star/delta | |
Cable reel | 1×K440 | |
Cable capacity of reel | 100m | |
Diameter of cable | 28mm | |
Cable specifications | 3×25 3G6 | |
Air and water system | ||
Air compressor | 1×JN5 | |
Capacity | 0.5m3/min | |
Pressure | 6-8bar | |
Shank lubrication device | Electrical pulse lubrication pump | |
Air consumption for lubrication | 0.3m3/min | |
Oil consumption for lubrication | 180-250g/h | |
Water pump | 1×CR3 | |
Power | 1.5kW | |
Pump capacity | 3m3/h | |
Chassis | ||
Diesel engine | Cummins QSB3.9-C80-31 60kW/2200rpm | |
Exhaust purification | Exhaust catalyzer | |
Drive system | Four-wheel drive | |
Travel brake | Hydraulic brake | |
Parking brake | Wet multidisc brake | |
Fuel tank | 60L |
- The hydraulic rock bolting rig has one drill boom with multi-station feed beam, and is configured with bolt magazine and meshing module, it is suitable for multiple bolting operations such as tubular friction and resin rock bolting; A complete range of functions including hole drilling, meshing, bonding agent feeding and bolt installation can be implemented through the operator control panel;
- The medium/low pressure hydraulic drifters from Montabert are used in the rock bolting rig. Hydraulic hoses and seals do not operate in high pressure conditions since the hydraulic drifter works under low oil pressure, thus resulting in prolonged service life, high reliability and less maintenance cost when compared to high pressure hydraulic drifter;
- Stepped piston is used in rock drill (drifter), which helps increase drilling speed, improve the efficiency of impact energy transfer from drill to rock, and reduce the consumption of drilling tools while maintaining the condition of the drill rig;
- Low-emission Cummins diesel engine paired with hydraulic four-wheel-drive transmission system is included in the hydraulic rock bolting rig, achieving stepless speed adjustment, high gradeability and fast walking speed;
- The exhaust purification device is equipped to greatly improve the underground working environment;
- Wet multi-disc service brake and spring-applied hydraulically released parking brake provide safe braking and high stability; In addition, emergency stop buttons at multiple points significantly enhance the safety during underground mining and tunneling operations;
- The spacious operating environment, lifting protective roof and considerably designed automatic functions of the rock bolting rig allow the operator to focus on drilling safely, quickly and accurately;
- Optimal layout of the drilling rig enables operator has a good visibility, and all parts at service points are securely protected, and accessible for easy maintenance;
- KM211 hydraulic rock bolting rig is equipped with the original power control valve block from Montabert, France, enabling it to feature automatic impact pressure adjustment, and anti-jamming function. This ensures smooth and accurate hole drilling during the operation.
- The hydraulic rock bolting rig uses Kaishan brand energy-saving integrated direct-connected screw air compressor, offering smooth operation, easy maintenance, significantly saved energy and reduced pollution. This makes a great contribution to improving the working environment, and protecting human health.
- The mining articulated chassis is equipped with wheel-side motors, with an articulated steering angle of ±35° and a rear axle swing angle of ±6°.
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos