WN03RA200M General Motorized Rotation Stages

WN03RA200M General Motorized Rotation Stages
WN03RA200M General Motorized Rotation Stages
WN03RA200M General Motorized Rotation Stages
WN03RA200M General Motorized Rotation Stages
Request a Quote

WN03RA200M General Motorized Rotation Stages is suitable for providing rotational displacement by electric control in automatic displacement control in scientific research, full-automatic measuring and testing equipment, industrial automation and other fields. This motorized stage is small, light, and suitable for low speed and low load situation.

Parameter table of WN03RA200M Motorized Rotation Stages with Steeper Motor

Structural parameter
Angle range Table size Worm gear ratio Guide type Stepper motor (1.8°) Center load capacity Weight
360° φ200mm 180:1 bearing SST57D3301 55kg 7.9kg
Solution Parameter
Resolution Speed Repeatability Positional accuracy Run-out of top plate Backlash Eccentricity Step-out Driving parallelism
0.01°=36″ (Non-MS driver) 0.0005°=1.8″(20 MS driver) 20°/sec 0.005°=18″ 0.01°=36″ 15µ 0.005°=18″ 20µ 0.005°=18″ 100µ
Features of WN03RA200M Motorized Rotation Stages with Steeper Motor
  • The motorized stage is made using aluminum alloy material, and its surface is blackened by anodic oxidation, so this stage ideally suits for low vacuum environment.
  • Equipped with standard stepper motor and RS232 interface, the WNSC series motion controller which was independently developed by BJWN can realize automatic control.
  • High quality precision ground lead screw drive, small lead, same micro-steps can realize high resolution.
  • The clearance of the ground lead screw can be minimized by the structure design of eliminating backlash nuts.
  • Cross roller guide for stable and smooth motion; laterally adjustable for the pre-tension force of guide and eliminating clearance; the motorized rotary stage could be used in multi-dimensional combination.
  • Greatly reduce the pitching and yawing of the motorized stage through the ground base plate and reasonable fixed guide, so as to effectively improve the straightness and driving parallelism.
  • Connected the stepper motor and ground lead screw by high quality flexible coupling, drive synchronization, good for eliminating eccentricity and greatly reducing eccentricity disturbance, lower noise.
  • Install zero and limit switches at both ends for accurate positioning and product protection.
  • The base has tapped hole and through hole with standard spacing for the convenience of installation and fixation.
  • Accept customized installation of servo motor and linear scale.
Related products
Send Message
Other Products
Inquiry
Inquiry