Black Non-Corrosive Silicone Adhesive and Sealant, ZS-NJ-D935BL
Request a Quote
ZS-NJ-D935BL RTV Silicone Adhesive Sealant
Description
ZS-NJ-D935BL RTV silicone adhesive sealant is a one-component, room-temperature curing, dealcoholized silicone sealant. This product provides good adhesion to many substrates like aluminum, copper, stainless steel, ceramic, etc. Superior dielectric properties and heat resistance make this product applicable at a temperature range of -60℃～200℃. During curing, alcohols will be realized that is non-corrosive to materials like PC, copper and so on. Meets the requirements of EU RoHS.
Typical applications
Bonding, sealing and fixing electronic components
Technical specs
| Uncured properties | Appearance | Black, paste |
| Tack free time (min) | ≤15 | |
| Cure through time (d) | 3～7 | |
| Cured properties | Specific gravity (g/cm3) | 1.45～1.55 |
| Hardness (Shore A) | 45～55 | |
| Tensile strength (MPa) | ≥2.0 | |
| Shear strength (MPa) | ≥1.5 | |
| Elongation (%) | ≥150 | |
| Temperature resistance (℃) | -60～200 | |
| Volume resistivity (Ω·cm) | ≥1.0×1013 | |
| Dielectric Strength (kV/mm) | ≥13 | |
| Flame retardant rating | UL94 V-0 |
Note:
- The performance data above are tested 7days after curing at 25℃ and 55% relative humidity.
- The product cures tack free more slowly as the storage time increa
- Zhaoshun cannot assume responsibility for actual values obtained under different conditions or caused by product improvement.
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
