Sand and Dust Environmental Test Chamber Manufacturer

Sand and Dust Environmental Test Chamber

Request a Quote

View All: http://climate-tester.com/10-sand-and-dust-environmental-test-chamber.html

Sand and dust blown using the chamber's blower goes through product sample surfaces in order to test the product resistance to dusty, desert like environments.

Parameter:

Dimensions
Nominal volume	1m³
Interior	W1000×D1000×H1000 mm
Exterior	W1450×H1900×D1100 mm
Capability
Environment	Temperature:+25℃ Relative humidity:≤85% Atmospheric pressure:86~106kpa
Temperature range	Normal
Humidity range	< 65%R.H
Dust concentration	2～4kg/m3
Wind speed	2-10M/S
Blowing time	1s～99h adjustment
Vibration time	1s～99h adjustment
Dust	Dry talc power through a square sieve whose sieve hole diameter is 75µm and wire diameter is 50µm Dust concentration:2-4Kg/m3
Noise	≤75dB(A)

Internal structure
Internal chamber
Dust inlet
Pressure gauge

Features:

The high quality silicone rubber seal strip features an excellent tightness, as well as an outstanding aging and high temperature resistance, thus preventing any leaks.
Dust will fall and gather at the tapered bottom of the internal chamber equipped with a vibrator. Operators can then remove dust and sand from the dust outlet.
Customers can install remote control software on a computer in order to allow the operator to remotely control the equipment.