MJX266E(1.2W)

Request a Quote

View All: http://factory-ledlighting.com/2-2-2-1-mjx266e-1-2w.html

Connected with flexible cables
Type of protection (modules): IP65
Color rendering index Ra：≥75
Luminous flux per module chain：120LM
CE marked
5 year guarantee
Suitable for 6-20cm thickness of light box and signage lighting

Features:

These LED lights feature a high brightness EMC3030 LED, low light degradation, quick heat dissipation, and a high lighting efficiency
Available in white / true white / warm white color
PMMA optical lens with beam angle of 15*45°
Suitable for 50-100cm distance light box
Injection craft, aluminum PCB exposed with better heat dissipation
With thermal adhesive on the back, it features an excellent adhesion and will quickly conduct heat to the profile.
Fire rating to UL94V-0
DC12Vlow input, safe and reliable, waterproof IP65

Technical parameters:

Model	LED chip	Light color LED	Color temperature(K)	Nominal voltage( V )	Power( W )	Luminous flux	Efficacy nominal(LM/W)	Beam angle	Nominal currentt（mA）	Certification	Color rendering index R（CRI）
						( LM )		( °)
MJX266E	3030	Pure White	6000-7000	12	1.2	120	100	15X45	100	CE RoHS	≥75

Other technical parameters:

Max daisy chain（PCS）	Color	LED drivers	Weight (g/pcs)	Working temperature（℃）	Temperature（℃）	IP rating (modules)	Dimension	Number of LEDs per module	Warranty period（year）
							（lengthwidthheight mm）
20	White	Constant Voltage	13	-25～ 60	-25～ 70	IP65	38267.8	1	5

Note：
①Testing environment temperature is 25±2℃;
②The above data are typical values, actual data may be different, and data is subject to change without notice.
③The modules are high-power products, and should not be used as a double sided power supply method.

Installation or wiring diagram

Installation method: Installed on the side of box, back glue scheduled, fixed with screw

Cascade can cut, single module can be cut

Installation Instructions:

The main power cable is 2x1.5mm² or longer. If longer LED Rigid Bar lines are needed, the lamp power must be selected with a wire above 0.75mm2 / 18 # specifications in order to avoid overloading the power cord. Overloading the power cord leads to excessive heat and dangerous consequences. The switching power supply and power cord length straight between the lamp should not be longer than 3 meters. If longer, the line loss increases with an increase in total power.
Please use the connection diagram in the wiring scheme.
The screws in the lamp mounting should be inserted straight into the holes and locked into place.
When the LED Rigid Bar trails have a bare wire conductor, using diagonal pliers, first strip about 10mm of the wire, then screw it into the connection head insulation protection.
To ensure waterproofing and corrosion protection, after the power line is screwed into the terminals, we recommend an injection of a one-component silicone (or otherwise neutral glass, plastic, or waterproof grease) to cover the bare copper wire power cord for additional protection.
Do not touch the wire after it is installed, as it is a live wire.
We recommend a switching power supply with the relevant regulatory certification (short circuit protection, overvoltage protection, overcurrent protection).

Dimension:

Light Distribution Curve:

Connection diagram:

Examples of applications: