KT6C Integrated Down the hole Drill Rig for Open Use
This product has been discontinued and removed from our shelves.
The KT6C Integrated down the hole drill rig for open use is an advanced drilling device integrating a down hole drilling system and screw air compression system. It features the typical compact structure found in our other products as well as excellent integrity and mobility. Equipped with a Cummins China stage III engine, the drill rig meets national standards for emissions and environmental impact. This outstanding machinery is characterized by high energy efficiency, safety, environmental-friendliness, flexibility, simple operation, and stability.
Brief Parameters
Drilling diameter: Φ80-105mm
Depth of economical drilling: 25m
Method of Feed: Oil cylinder-leaf chain
Feed stroke: 3000mm
Supporting power: Cummins QSB5.9-C210-30(154KW/210HP)
Stable hydraulic system
Model of drill rig | KT6C |
Drilling hardness | f=6-20 |
Drilling diameter | 80-105 mm |
Depth of economical drilling | 25 m |
Travelling speed | 2.5/4.0 km/h |
Climbing capacity | 30° |
Ground clearance | 430 mm |
Power of complete machine | 154 kW |
Diesel engine | Cummins QSB5.9-C210-30 |
Capacity of screw compressor | 10 m³/min |
Discharge pressure of screw compressor | 15 bar |
Outer dimensions (L×W×H) | 6500×2400×2600 mm |
Weight | 8000 kg |
Rotation speed of gyrator | 0-120 r/min |
Rotary torque | 1400 N*m |
Maximum push-pull force | 25000 N |
Lifting angle of drill boom | Up 54°, down 26° |
Tilt angle of beam | 125° |
Swing angle of carriage | Right 47 °, left 47° |
Lateral horizontal swing angle of carriage | Right -15°~97° |
Swing angel of drill boom | Right 53°, left 15° |
Leveling angle of frame | Up 10°, down 9° |
One-time advance length | 3000 mm |
Compensation length | 900 mm |
DTH hammer | M3 |
Drilling rod | φ64×3000 mm |
Method of dust collecting | Dry type (hydraulic cyclonic laminar flow) |
- Air Cleaner
- High torque gyrator
- Steel track adaptable to all terrains
- Easy Used Control Panel