Contrast Media Injector, YSW 6800 CT
Request a Quote
Single-use Disposable Medical Products Manufacturer Since 1997
Contrast Media Consumables
Features
- The new YS 6800 Series triple-head CT contrast media injection system features a streamlined and user-friendly design.
- The globally innovative Alpha Assistant intelligent automation system enables automatic connection of internal and external tubing and optimizes the air purging process, simplifying operation and improving workflow efficiency. Average patient turnover time is reduced by 20%-30% compared with conventional tubing-type high-pressure injectors.
- The side-mounted auxiliary display enhances operational safety and helps minimize the risk of liquid splashing. The innovative residual volume display automatically updates the remaining contrast media volume in real time, providing continuous and accurate monitoring.
- A magnetic holder combined with a 90-degree rotating vial loading mechanism allows convenient bottle installation and removal, improving handling efficiency.
- The proprietary MixFlow mixing algorithm enables tubing-type injectors to perform mixed-flow injection, supporting efficient contrast delivery and enhanced CT angiographic image quality.
Technical Specifications
| Main controller power supply | AC 198-242V, 50±1Hz, 980VA |
| Heads | Triple-head |
| Max. injection pressure | 330psi |
| Injection rate | 0.1-10mL/s, step 0.1mL/s |
| Mixed-flow injection | Supports contrast media/saline mixing, ratio 5%-95% |
| Injection phases | Up to 12-phase programmable injection |
| Alpha Assistant | Fully automatic internal and external tubing connection, air purging and line priming to achieve injection-ready status. Integrated external tubing detection helps prevent improper operation and reduce risk. |
| Overpressure stop and speed reduction | User-selectable response: deceleration prior to stop, or immediate stop upon overpressure |
| Air alarm | Supported |
| No. of ultrasonic air sensors | 5 |
| Automatic left/right channel switching | Supported |
| Automatic internal tubing up/down | Supported |
| Main operation screen | 15 inch |
| Device operation screen | 7 inch |
| Splash-proof device screen | Side-mounted design to minimize interference from contrast or saline dripping |
| Injection program storage/recall | Stores up to 2000 programmable injection protocols |
| Residual volume display | Real-time display of remaining volume on main or device touchscreen |
| Automatic residual volume refresh | Automatic refresh after bottle replacement without manual operation |
| Injection/priming method | Direct bottle insertion without syringe, bottle opening, or manual filling; automatic air purging |
| Magnetic holder | Magnetic bottle holder with 90° rotating removal mechanism, no latch required |
| Aluminum alloy heating jacket | Optional heating jacket allowing convenient bottle installation and removal without opening protective cover |
| Data transmission | Wired or wireless (optional) |
| KVO | Supported |
| Injection delay | 0-1000s |
| Interphase delay | 0-1000s |
| Timer | Supports trigger timing at start and end of injection |
| Device touchscreen test injection | Supported |
| One-touch auto ready | Single-button automated preparation to injection-ready status |
| Bottle replacement sensing | Triple-head sensing detects bottle replacement operation |
| Information workstation | Not supported |