U-R2 General Purpose Solid Carbide End Mill - Corner Radius - 2 Flutes
Request a Quote
Request a quote
Unit: mm
| Order Code | Cutting Diameter (D) | Length of Cut (Lc) | Corner Radius (r) | Overall Length (L) | Shank Diameter (d) |
U-R2-01002 | 1 | 3 | 0.2 | 50 | 4 |
U-R2-01502 | 1.5 | 5 | 0.2 | 50 | 4 |
U-R2-02002 | 2 | 6 | 0.2 | 50 | 4 |
U-R2-03002 | 3 | 9 | 0.2 | 50 | 4 |
U-R2-63002 | 3 | 9 | 0.2 | 50 | 6 |
U-R2-03005 | 3 | 9 | 0.5 | 50 | 4 |
U-R2-63005 | 3 | 9 | 0.5 | 50 | 6 |
U-R2-04002 | 4 | 11 | 0.2 | 50 | 4 |
U-R2-64002 | 4 | 11 | 0.2 | 50 | 6 |
U-R2-04005 | 4 | 11 | 0.5 | 50 | 4 |
U-R2-64005 | 4 | 11 | 0.5 | 50 | 6 |
U-R2-05002 | 5 | 13 | 0.2 | 50 | 6 |
U-R2-05005 | 5 | 13 | 0.5 | 50 | 6 |
U-R2-06005 | 6 | 16 | 0.5 | 50 | 6 |
U-R2-06010 | 6 | 16 | 1 | 50 | 6 |
U-R2-08005 | 8 | 20 | 0.5 | 60 | 8 |
U-R2-08010 | 8 | 20 | 1 | 60 | 8 |
U-R2-10005 | 10 | 25 | 0.5 | 75 | 10 |
U-R2-10010 | 10 | 25 | 1 | 75 | 10 |
U-R2-10020 | 10 | 25 | 2 | 75 | 10 |
U-R2-12005 | 12 | 30 | 0.5 | 75 | 12 |
U-R2-12010 | 12 | 30 | 1 | 75 | 12 |
U-R2-12020 | 12 | 30 | 2 | 75 | 12 |
U-R2-16005 | 16 | 36 | 0.5 | 100 | 16 |
U-R2-16010 | 16 | 36 | 1 | 100 | 16 |
U-R2-16020 | 16 | 36 | 2 | 100 | 16 |
U-R2-20010 | 20 | 45 | 1 | 100 | 20 |
U-R2-20020 | 20 | 45 | 2 | 100 | 20 |
Type A: the cutting diameter is smaller than the shank diameter
Type B: the cutting diameter is equal to the shank diameter
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
