Dental Curing Light, LED.B

Dental Curing Light, LED.B
Dental Curing Light, LED.B
Dental Curing Light, LED.B
Dental Curing Light, LED.B
Dental Curing Light, LED.B
Dental Curing Light, LED.B
Request a Quote
  • 3-second curing cycle, providing short curing time adequate for bonding ceramic brackets to tooth in orthodontic treatment, and placing porcelain veneers;
  • Curing light meter is equipped to accurately measure the light output, providing the dentist with the information to determine whether the light intensity is influenced by power or other factors;
  • Four curing modes are available, Standard / Gradual/ Pulse/ 3-second Cure;
  • High power 7W blue light LED, light intensity is up to 2,000mW/cm2;
  • Cordless handpiece with rechargeable battery, charging base is available;
  • Built-in light intensity sensor;
  • 2200mAh high capacity lithium battery, a full charge allows for more than 400 times continuously under working mode of 10 seconds per cycle;
  • battery can last 6 hours after full charge;
  • Constant light output, the light intensity will not decrease even when the battery is low;
Specifications
Model LED.B
Material Plastic
Curing Mode L1: Standard mode L2: Gradual mode L3: Pulse mode L4: 3-second cure mode
Time Setting L1/L2/L3 modes: 5s, 10s, 15s, 20s, 25s, 30s ,35s, 40s (optional) L4 mode: 3s, 5s, 10s (optional)
Battery 2200Mah (rechargeable) D.C.3.7V
Input Voltage AC100~240V 50/60Hz 5V2A
Light Intensity L1/L2/L3 modes: 1000-1400mW/cm² L4 mode: 1600-1800mW/cm²
Wavelength 420-480nm
Features
  • 7W high power LED;
  • Constant light intensity;
  • Charging base with light meter, allowing for measuring light intensity any time;
  • 3-second cure mode, primarily suitable for porcelain veneer restoration;
  • Tags:
  • medical device supplier
  • dental light-curing units
  • LED light-curing devices
  • orthodontic device
  • medical devices
Related products
Send Message
Other Products
Inquiry
Inquiry