Vibstar Vibration Controller
Request a Quote
This Product has been discontinued and removed from our shelves
Best Solution for the Control of Vibrator
The Vibstar vibration controller is designed with the highest performance of floating-point DSP processor from U.S. TI Company. It gives highly reliable performance, by combining low-noise analog technology with 24bit high-precision module/digital conversion technology.
In addition, the Vibstar vibration controller can realize dependable interactive communication by adoption of a network interface and a computer. Its hardware comes with 8 synchronous input channels, one control output channel, and one COLA output channel. The software of our control equipment can offer multiple functions such as random, sine, classic shock, RSTD, sine on random, and the random on random. Our product is the optimum solution for the vibrator control system.
Technical Characteristics
- The use of network communication interface gives convenience for remote monitoring.
- High-safety output protection circuit can guarantee the safety of both specimens and test system.
- Extraordinary control performance and control accuracy are provided by the Vibstar vibration controller. The maximum number of random lines is 3200, and the minimum sine-sweep frequency reaches 1Hz.
- Innovative ALL-IN-ONE input interface is compatible with various types of sensor inputs.
- The Vibstar vibration controller allows the user-friendly software interface to be learned and utilized easily.
- WORD reports can be automatically or manually produced by the shaker controller.
- Online control with a power amplifier of DONGLING is available.
Inputs
| Number of Input Channels | 8 synchronous input channels |
| Input Impedance | ﹥110 k |
| Max. Voltage Input Range | ±10V |
| Max. Charge Input Range | ±10000PC |
| Signal-to-Noise Ratio | ﹥100dB |
| Analog/Digital Converter (ADC) | 24 bit resolution |
| Dynamic Range | 114dB |
| Max. Sampling Frequency | 192KHz |
| Input Interface | Optional of voltage, ICP and charge |
| Circuit Characteristics | 1. The input interface with built-in ICP flow source and charge amplifier 2. Two 10V/1V range and optional AC/DC coupling 3. Simulation of anti-aliasing filter |
Output
| Number of Output Channels | 1 output channel, 1 COLA output |
| Type of Output Signal | Voltage signal |
| Max. Output Voltage Range | 10V |
| Output Impedance | ﹤30Ω |
| Amplitude Accuracy | 2mV |
| Digital/Analog Converter (DAC) | 24bit resolution |
| Dynamic Range | 120dB |
| Max. Sampling Frequency | 192KHz |
| Circuit Characteristics | 1. Simulation of anti-aliasing filter 2. Output protection circuit |
10 Functions
- Random Vibration Control
- Sine Vibration Control
- Classical Shock Control
- Resonance Search and Dwell
- Sine on Random Control
- Random on Random Control
- Sine and Random-on-Random Control
- Shock Response Spectrum Control
- Random Vibration Signal Input
- Transient Shock Control
Random Performance Indicators
| Dynamic Range | 90dB |
| Control Accuracy | ±1dB |
| Closed-Loop Time | 100ms |
| Frequency Range | DC-4800Hz |
| Resolution | ≤3200 line |
| Control Strategy | Single channel, multi-channel weighted average, multi-channel maximum value, and multi-channel minimum value |
Sine Performance Indicators
| Dynamic Range | 95dB |
| Closed-Loop Time | 10ms |
| Waveform Distortion | <0.3% |
| Signal-to-Noise Ratio | ﹥100 dB |
| Frequency Resolution | 0.01% |
| Sweep Frequency Mode | Fix frequency, linear and logarithmic |
| Sweep Frequency Speed | Linear sweep 0~6000Hz/min |
| Logarithmic Sweep Frequency | 0-100 Oct/min |
| Frequency Range | 1Hz~5000Hz |
| Control Strategy | Single channel, multi-channel weighted average, multi-channel maximum value, and multi-channel minimum value |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
