PFA Heat Shrink Tubing
Request a Quote
Model: CYG-PFA
Material: PFA
Operating temperature: -65℃-260℃
Minimum full recovery temperature: 350℃
Shrink ratio: 1.3:1
Application
PFA has an excellent high-temperature performance, chemical resistance, high insulation and excellent mechanical properties. It is designed to provide insulation and mechanical protection in severe chemical and thermal environments. PFA heat shrink tubing is also widely used for areas where there are requirements for a superior clarity, flexibility, and a wider range of continuous operating temperatures.
Standard: AS23053/11
SizeSize | ID as supplied (MM) | ID after recovery (MM) | Wall after recovery (±0.1) (MM)0.2 |
3.5 | 3.8±0.2 | 2.7 | 0.2 |
4.0 | 4.5±0.2 | 3.3 | 0.2 |
5.0 | 5.5±0.2 | 4.3 | 0.2 |
6.4 | 7.0±0.2 | 5.1 | 0.2 |
7.9 | 8.0±0.2 | 6.0 | 0.2 |
10.0 | 10.6±0.2 | 7.4 | 0.3 |
12.0 | 12.7±0.2 | 8.8 | 0.3 |
14.0 | 14.5±0.2 | 10.7 | 0.3 |
17.0 | 17.3±0.2 | 12.8 | 0.4 |
19.0 | 19.0±0.2 | 16.5 | 0.5 |
Remarks: Special sizes are available upon request, as are customization services.
SpecificationsItems | Test methods | Specification |
Density | ASTM D 792 | 2.12-2.17 |
Shrink ratio | 1.3:1 | |
Operation temperature℃ | -65--260 | |
Min. shrink temperature℃ | 220 | |
Dielectric strength | ASTM D 2671 | ≥ 19.7 kV/mm |
Longitudinal change | ≥ 10% | |
Water absorption % | ASTM D 570 | <0.01% |
Tensile strength | ASTM D 638 | ≥13.8MPa |
Elongation | ASTM D 638 | ≥200% |
Volume resistivity | ASTM D 876 | ≥1017Ω.cm |
Low temperature flexibility | -65±1℃ | No cracking |
Flammability | UL224 | PASS |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos