Analog Signal Isolator
Request a Quote
Analog Signal Isolator
Analog signal isolator provides isolation for single channel input DC current or voltage signal, and converts it into two isolated analog outputs. It can work with a transducer to generate a signal channel for programming device or other signal channels connecting to field signal indicator. Due to its single channel of input signal, the analog signal isolator enables the voltage drop to be constant, up to 3.5V, without being affected by loads. The isolation voltage of optocoupler is up to 2kV.
Specifications
Technical parameters | Index | |
Input | Range | Current: 4-20mA, 0-1mA, 0-20mA Voltage: DC 0-75mV, 0-5V, 0-10V, 0-300V |
Impedance | Variable, voltage drop up to 3.5V | |
Overload | Current: 100mA or 1W Voltage: 50V at 0-10V | |
Output | Range | One circuit: DC 4-20mA; the other circuit: DC 4-20mA or DC 0-5V |
Load | Current: ≤500Ω; voltage: ≥1kΩ | |
Zero adjustment | 15% | |
Span adjustment | 15% | |
Protection | Short circuit protection | |
Power supply | Nominal value and range | DC 24V (alternatively DC 18V-36V) |
Other | Accuracy/linearity | Max. 0.5% of full span |
Temperature effect | ≤200ppm/℃ | |
Response time | ≤400ms | |
Isolation voltage | 2kV between input and each output and between power supply to output | |
Operating/storage temperature | 10℃ ~ 55℃/-25 ~ 70℃ | |
Installation method | With guide rail TS35 |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos