ZV Series Vertical Sump and Slurry Pump Manufacturer

ZV Series Vertical Sump and Slurry Pump

Request a Quote

View All: http://pumps-maker.com/1-7-vertical-sump-slurry-pump.html

ZV series vertical sump and slurry pump is a single-stage, single suction, cantilever, vertical, centrifugal slurry pump, suitable for transporting abrasive, coarse particles, high concentration slurry, which does not need any seal water and can work normally in the condition of insufficient intake. The pump is thus particularly suitable to be used as various pit pumps in mines and coal preparation systems.

Application

Parameter

Caliber	40-250mm
Maximum flow quantity	1089m³/h
Maximum head	38m
Speed	400-2200r/min
Power	15-200kw

For details, please refer to the bottom clear water performance table.

ZV(R) clear water performance table

Model	Maximum power through belt drive KW	Material		Clear water performance
		Bushing	Impeller	Flow quantity Q		Head H	Speed n	Efficiency Eff
		Bushing	Impeller	(m³/h)	(l/s)	(m)	(r/min)	η%
40R-ZV	15	M	M	19.44-43.2	5.4-12	3.5-28	1000-2200	38
40R-ZVR	15	RU	RU	17.28-39.6	4.8-11	3-24.5	1000-2200	40
65Q-ZV	30	M	M	23.4-87.12	6.75-24.2	5.5-31.5	700-1500	51
65Q-ZVR	30	RU	RU	22.5-105	6.25-29.15	5.5-27	700-1500	51
100R-ZV	75	M	M	54-289	15-80.3	5-37	500-1200	56
100R-ZVR	75	RU	RU	64.8-285	18-79.2	7.5-38	600-1200	62
150S-ZV	110	M	M	108-479.16	30-133.1	8.5-37	500-1000	55
150S-ZVR		RU	RU	108-479.16	30-133.1	8.5-35.5	500-1000	56
200S-ZV		M	M	189-891	52.5-247.5	6.5-37	400-850	64
250T-ZV	200	M	M	261-1089	72.5-302.5	7.5-33.5	400-750	60

Structural features
1. The pump body, impeller and other flow parts of ZV series pump made of a variety of wear-resistant white high chromium castings, have the features of abrasion resistance and erosion resistance. The parts of ZVR series pump contacting with the media are all made of rubber material, and have excellent corrosion resistance. The other structure is the same as ZV series pump.

2. The pump adopts no shaft seal structure, and the pump head woks immersed in the liquid. The pump is often installed in the tunnel, which can be fixed on the beam of the tunnel or suspended for use.

3. The bearing adopts grease lubrication, easy for maintenance.

4. Suction pipe can be installed at the inlet below the pump so as to suction the high concentration slurry below the tunnel.

5. The pump can be applied to extensive working conditions including intermittent conditions.

6. The adjustment of the impeller position can be realized by conveniently adjusting the thickness of the gasket between the bearing body and the bracket.

7. The impeller suction mode is bidirectional suction, the inlet and outlet perpendicular to the pump shaft, and the structure is symmetrical, which can effectively reduce the axial load.

Outline drawing

Outline Dimensions

Pump model	A	B	C	D	E	F	G	H	J	K	0L	M	N	P		Q		R		Weight（Kg)	Min.size of slurry pool
													Max.size								S	T	øV	øX	Volume (m3)
40P-ZV	137	286	154	900*1200	380	500	500	450	450	205	127	174	733		675		248		629	285	280	695	550	1000	0.34
40P-ZVR	140	265	175		380															250
65Q-ZV	227	399	231	900 1200* 1500	492	680	680	620	620	285	178	265	898		794		290		681	432	350	925	800	1400	0.9
65Q-ZVR	230	380	260		498															386
100R-ZV	260	515	317	1200 1500*1800	662	1000	870	800	930	400	229	393	1141		1020		416		960	867	350	1225	1000	1750	1.86
100R-ZVR	266	535	332		668															772
150S-ZV	390	640	375	1500 1800*2100	875	1100	1100	1030	1030	500	280	475	1311		1200		476		1011	1737	350	1525	1250	2150	3.54
150S-ZVR	395	674	400		883															1520
200S-ZV	450	772	440	1500 1800*2100	878	1300	1200	1100	1200	600	343	550	1313		1300		476		1011	3087	350	1525	1500	2400	4.76
250T-ZV	500	903	470	1800 2100*2400	1000	1750	1450	1350	1650	700	406	685	1572		1750		561		1246	4086	400	1775	1700	2700	6.68

All dimensions are in millimeters (mm)