PVC Insulated Heating Cable
Due to its electrical insulation ability, flexibility and excellent heat conductivity, PVC insulated heating cable produced by Senphus are widely applied in electronic products all over the place. They are used in products like heating wires, air conditioners, refrigerators and coolers.
There are three main models PVC wires:
A, SH-PVC
B, SH-BPVC-15
C, SH-2PVC-20
A, SH-PVC
Rated temperature: 90℃- 105℃
Rated voltage: 125V-300V
Structure:
Conductor: single conductor alloy or resistance wires twisted into a spiral on fiberglass, nylon, polyester fibers
Insulation:PVC
Product Certificates:
UL1285 UL1080 UL1137 UL1465 UL1796 UL1471
B, SH-BPVC-15
Rated temperature:90℃-105℃
Rated voltage:125V--600V
Structure:
Conductor: single conductor alloy or resistance wires twisted into a spiral on fiberglass, polyester fibers, nylon.
Insulation: PVC
Reinforced core: cotton yarn, nylon wire, etc.
Certificates:
UL1134 UL1173
C, SH-2PVC-20
Rated temperature:90℃- 105℃
Rated voltage:125V - 150V
Structure:
First layer heating conductor: resistance wires twisted into a spiral on fiberglass
Second layer heating conductor: alloy wires twisted into a spiral on the insulated heating wire
Insulation: PVC/PE
Certificates:
UL10716 UL10357 UL10932 UL10594 UL11016
1.Electrical Conductor;2.PVC Insulation; 3.Braiding;4.Fiber Glass Core;5. Heating Wire;6.PVC Insulation
Technical Parameter| Item | Performance index | Instruction | |
| Insulation PVC | tensile strength | ≥ 1.05kg/mmsq | UL1581 |
| elongation | ≥ 100% | ||
| minimum average thickness | ≥ 0.50mm | ||
| Finished-product wire | hot deformation test | ≤ 50% | UL standard |
| Spark Test | no spark-over | 6.0KV/0.15sec : | |
| conductor resistance | nominal value 10%/-5% | ||
| resistance scope | 1--10000 ohm/m | ||
| O.D. of finished product | 3.0 /-0.15mm | other O.D. are optional . | |
| length per coil | 100---500m | ||
