Hydraulic Drilling Rig

Request a Quote

View All: http://geotec-drill.com/5-drill-rigs/5-hydraulic-drill-rig-8.html

Brief Introductions of YDX-5C Hydraulic Drilling Rig

The YDX-5C hydraulic drilling rig is mainly designed for prospecting solid mineral deposits. It adopts advanced technology in wire line coring and is driven with rotator. YDX-5C hydraulic drilling rig is widely used in geology, metallurgy, coal, petroleum, natural gas, groundwater and other industries.

Technical Features of Hydraulic Drilling Rig

Adopt the world famous hydraulic pumps, valves and motors.
There are two kinds of chassis: tyre-traction (with steering gear) and self-propelled steel crawlers.
Hydraulic cylinder is adopted for lifting/lowering.
When transported and located, the mast can be folded. The mast could work stably with foot clamp touching the earth.
Hydraulic drilling rig adopts load sensitive system and is equipped with high-position operation platform and operation hole platform (i.e. low-position operation platform).
The rotator is fed and driven with a system connecting the spindle and oil cylinder with chain. It has the following function: if the piston rod of oil cylinder moves one certain distance, the spindle will double the distance. The rotator is equipped with a four-speed gear shift, and hydraulic pressure with stepless speed change can adjust its speed. As to the rig, in its up part, it is equipped with centering guide; in its lower part is a guide. At the operation hole of the lower platform, a hydraulic clamp is adopted.

Main Technical Parameters of Hydraulic Drilling Rig YDX-5C

Hole Depth of Hydraulic Drilling Rig (meters)
Drilling Capacity	HWT/PWL:680 meter HRQHP/HQ :1000 meter NRQHP/NWL:1300 meter BRQHP/BQ: 1500 meter
Prime mover
Standard Unit	Cummins 6CTA8.3-C195 (turbocharged and charge water cooled)
Displacement	8.3L
Power (Maximum)	145kW(198hp)
Rated RPM(Factory setting)	1,900 rpm
TORQUE and RPM RATINGS of Hydraulic Drilling Rig
(Hydraulic motor at maximum/minimum displacement, prime mover at 2,200 rpm)
	Rpm	Nm
Low-speed Gear	125-360	4150-1600
High-speed Gear	395-1050	1450-550
HYDRAULIC SYSTEM
Primary Pump Package	Axial Piston variable displacement Triplex pump for driving of Drill Head Rotation,Main Hoist, Mud Pump & Line Winch. Maker: SAUER-DANFOSS 1st Pump: 150LPM at 28.5MPa 2nd Pump: 120LPM at 25MPa 3rd Pump: 102 LPM at 25MPa
Side Pump Package	Duplex gear pumps feeding oil for hydraulic outriggers，upper and foot clamps, Drill Head Rotation and main hoist following, Rotator floating control system. Maker: Changyuan Hydraulic 1st Pump: 12LPM at 20MPa 2nd Pump: 8LPM at 10MPa
Hydraulic Tank
Capacity	420 L
DRILL HEAD
Rotation Motor	Double Hydraulic Motor-variable/Reversible Maker: SAUER-DANFOSS
Mechanical Transmission	Funk 2 speeds
Ratios	1st8.776: 1 2nd2.7 16:1
Head Opener	Pivoting style, Manual actuated
Hydraulic Chuck(PQ)	Hydraulically opened, Disc Spring Clamping, Normally Closed Type
	Axial Holding Capacity of222 400 N
Hold Diameter	121mm
DRILL MAST AND FEED SYSTEM
Mast Height	10.3m
Slippage Stroke	1100mm
Feed Stroke Length	3200 mm
Feed Pull	15000kg
Feed Thrust	7500kg
Rod Pull	3m or 6m
Mast Adjusting Angle	0o - 90o
Drilling Angle	45o - 90o
DRAW WORKS for Hydraulic Drilling Rig
Main Line Winch – driven with parallel motors
Hook Load (single part line) Bare Drum	7700kg
Hoisting Speed (single part line) Bare Drum	38-70m/min
Main Line Winch Cable Dia	18mm
Main Line Winch Cable Length	50m
Wire-line Hoist
Line PullBare Drum	1200kg
Line Speed Bare Drum	164 m/min
Wire-line Hoist Cable Dia.	6mm
Wire-line Hoist Cable Length	1500m
Mud Pump
Type	Reciprocating Pump Triplex Plunger
Stroke	100mm 250,145,90,52
Output volume (l.p.m)
Discharge pressure (Mpa)	2.5, 4.5,6.0, 6.0
Dimensions and Weight
Dimensions (for transportation)	5600×2240×2650mm (L×W×H)
Weight	7000kg