Shanghai MITSUBISHI Escalator Series K
Request a Quote
RemarkStandard Functions01 Protection of phase dislocation and phase loss3EWhen phase dislocation or phase loss of input power supply occurs, the main circuit and control circuit will be cut off, in order to automatically stop the escalator.02 Non-operation reversal protectionARPIf reverse movement occurs by accident during operation, the device will cut off the power supply of driving unit and brake.03 Additional brakeAUX-BKThe additional brake system will stop the escalator before that the operating speed is 1.4 times higher than the rated speed, or when the running direction changes.When lifting height exceeds 6000mm04 Operating brakeMUSTACHEThe driving device is equipped with an operating brake. When the operating brake works, the escalator will stop.05 Safety device of comb plateCSSIf something gets stuck between comb plate and the pedal, the device will cut off the power supply of the driving unit and the brake.06 Safety device of drive chainDCSIf the drive train breaks or elongates abnormally, the device will cut off the power supply of driving unit and brake.07 Emergency stop buttonE-STOPWhen an emergency occurs, press the emergency stop button to cut off the power supply of driving unit and brake.08 Speed limiting device for low speedGOVIf the speed is lower than rated speed by 20%, the device will cut off the power supply of motor and brake.09 Handrail inlet coverHGBThe long, flexible rubber cover covers at the handrail inlet, to avoid pinching or other accidents.10 Speed limiting device 1HGD1The device will cut off the power supply of driving unit and brake when the operating speed reaches 1.2 times of the rated speed.11 Speed limiting device 2HGD2In the operating speed exceeds the rated speed of 1.4 times before, the device operation, and cut off the additional brake power.When the lifting height exceeds 6000mm12 handrail entry safety deviceHGSIf a foreign object into the handrail at the entrance card, the device will shut down the drive and the host of the brake power.13 step chain safety deviceSCSIf the rung-strand breaks or abnormal elongation, the device will cut off the host drive and brake power.14 Cascade subsidence safety deviceSRSIf any part of the rung subsidence damage can not be properly engaged with the upper or lower comb plate, the device will cut off the host drive and brake power.Optional Functions15 signal interface meansBAThis output means escalator basic operational status signal.When the Model KS-LB, KS-SB, KS-B can only choose one time16 Elevator Monitoring SystemSMOS-IIThe system uses state of the computer operation and fault monitoring of the escalator or walkway17 skirting safety deviceSSSWhen a foreign body is sandwiched between steps and skirting, the device will shut down the drive and the host of the brake power.
Basic Specific
project | Specifications Content | Remark | ||
Armrest nominal width (mm) | 1200 | 1000 | 800 * | |
Width between the armrest (mm) | 1228 | 1028 | 828 | |
Escalator nominal width (mm) | 1000 | 800 | 600 | |
Theory of transmission capacity (person / hour) | 9000 | 6750 | 4500 | |
Series Model | KS-B/KS-LB, KS-LB/KS-LBF, KS-SF/KS-SBF | |||
The inclination angle (degrees) | 30, 35 | |||
Speed (m / S) | 0.5 | |||
Escalators lift height (mm) | 1400-7000 | The inclination angle is 30 ° when | ||
1606-6000 | The inclination angle is 35 ° when | |||
Power supply | 380V50Hz three-phase | |||
Lighting power | 220V50Hz single-phase | |||
Cascade horizontal movement distance (mm) | 800 (Level 2 step); 1200 (Level 3 rungs) | Lifting height (HE) ≦ 6000mm when | ||
1200 (Level 3 rungs) | Lifting height (HE) > 6000mm when | |||
Environment | indoor | |||
Passengers photoelectric type | Built-in skirt photoelectric | Frequency specifications, step ladders, multi ladder select Configure | ||
External photoelectric column | Frequency specifications, single-staircase, the choice of configuration (with Shanghai Mitsubishi Elevator Co.,Ltd. multi ladder) |
Note: For model KS-SB/KS-SBF, the handrail nominal width of 800mmis not available.
Power Supply Data
Power Supply for Running (3 Phases)
Handrails nominal width | Lifting height by HE (mm) | Power supply capacity (kVA) |
1200 | HE ≦ 4000 | 8 |
4000 < HE ≦ 6000 | 10.4 | |
6000 < HE ≦ 7000 | 12.5 | |
1000 | HE ≦ 5000 | 8 |
5000 < HE ≦ 7000 | 10.4 | |
800 | HE ≦ 7000 | 8 |
Power Supply for Lighting (Single Phase)
Series Model | Lighting height by HE (mm) | Power supply capacity (kVA) |
KS-LB/KS-LBF | HE ≦ 4000 | 2 |
4000 < HE ≦ 6000 | 2.3 | |
6000 < HE ≦ 7000 | 2.5 | |
KS-B/KS-BF | HE ≦ 7000 | 1.3 |
KS-SB/KS-SBF | HE ≦ 7000 | 1.3 |
project | standard | Optional | Remark |
An upper truss length TJ ( mm ) | 2437 | 2437 ~ 5137 | Tilt angle of 30 [deg.] , Level 2 the rung |
2842 | 2842 ~ 5542 | The inclination angle of 30 [deg. , Level 3 rung | |
2497 | 2497 ~ 5197 | Tilt angle of 35 [deg.] , Level 2 the rung | |
2902 | 2902 ~ 5602 | The inclination angle of 35 [deg. , Level 3 rung | |
The length of the lower portion of the truss the TK ( mm ) | 2180 | 2180 ~ 4880 | Tilt angle of 30 [deg.] , Level 2 the rung |
2585 | 2585 ~ 5285 | The inclination angle of 30 [deg. , Level 3 rung | |
2215 | 2215 ~ 4915 | Tilt angle of 35 [deg.] , Level 2 the rung | |
2620 | 2620 ~ 5320 | The inclination angle of 35 [deg. , Level 3 rung | |
An upper truss depth of the FJ ( mm ) | 1060 | ||
The lower part of the truss depth of FK ( mm ) | 1060 | ||
Central truss depth of the FC ( mm ) | 918 | The inclination angle is 30 ° when | |
938 | The inclination angle is 35 ° when | ||
Escalator Width ( mm ) | 1550 | Handrails nominal width of 1200mm when | |
1350 | Handrails nominal width of 1000mm when | ||
1150 | Handrails nominal width of 800mm when | ||
Intermediate support distance LA | ( TK 250 ) ~ 11000 | The inclination angle of 30 [deg. , Armrest nominal width 1200mm , and has an intermediate support when | |
( TK 250 ) ~ 11400 | The inclination angle of 30 [deg. , Armrest nominal width 1000mm , and has an intermediate support when | ||
( TK 250 ) ~ 11700 | The inclination angle of 30 [deg. , The nominal width of the handrail 800mm , and has an intermediate support when | ||
( TK 370 ) ~ 11000 | Tilt angle of 35 [deg.] , Handrails nominal width of 1200mm , and there is an intermediate support when | ||
( TK 370 ) ~ 11400 | The inclination angle of 35 [deg. , Armrest nominal width 1000mm , and has an intermediate support when | ||
( TK 370 ) ~ 11700 | The inclination angle of 35 [deg. , Armrest nominal width 800mm , and has an intermediate support when | ||
Intermediate support from the LB | ( TJ 240 ) ~ 11000 | The inclination angle of 30 [deg. , Armrest nominal width 1200mm , and has an intermediate support when | |
( TJ 240 ) ~ 11400 | The inclination angle of 30 [deg. , Armrest nominal width 1000mm , and has an intermediate support when | ||
( TJ 240 ) ~ 11700 | The inclination angle of 30 [deg. , The nominal width of the handrail 800mm , and has an intermediate support when | ||
( TJ 110 ) ~ 11000 | Tilt angle of 35 [deg.] , Handrails nominal width of 1200mm , and there is an intermediate support when | ||
( TJ 110 ) ~ 11400 | The inclination angle of 35 [deg. , Armrest nominal width 1000mm , and has an intermediate support when | ||
( TJ 110 ) ~ 11700 | The inclination angle of 35 [deg. , Armrest nominal width 800mm , and has an intermediate support when |
Remarks:
1. For the models of KS-SB, SBF KS, the handrail nominal width of 800mm is not available.
2. For RA, RB and RC, please contact the related salesmen of Shanghai Mitsubishi.
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos