Hot Feed Straining Extruder

Hot Feed Straining Extruder
Request a Quote

Hot feed straining extruder requires the rubber material fed into it to undergo hot refining, with uniform and stable feeding at a constant speed. The material temperature should be maintained between 50 to 70 ℃. This type of rubber extruder needs to be used together with an open mixing mill, where the material is directly fed under the open mixing mill to achieve simultaneous straining and sheeting processes.

Specifications
Model XJ-150 XJ-200 XJ-250
Screw Diameter (mm) 150 200 250
Ratio L/D 7:1 6:1 5.5:1
Screw Speed (r/min) 50 43 38
Main Motor (kW) 55HZ-6P 75HZ-6P 90HZ-6P
Reduction Gear Ratio 20:1 20:1 25:1
Feeding Method Double feed roller Double feed roller Double feed roller
Output (kg/h) 900 900 900
Overall Dimension (L×W×H) (mm) 3900×2100×1700 4400×2300×1800 5300×2600×1900
Related products
Send Message
Other Products
Inquiry
Inquiry