ONU for Ethernet Passive Optical Network (EPON)

ONU for Ethernet Passive Optical Network (EPON)
ONU for Ethernet Passive Optical Network (EPON)
ONU for Ethernet Passive Optical Network (EPON)
ONU for Ethernet Passive Optical Network (EPON)
ONU for Ethernet Passive Optical Network (EPON)
ONU for Ethernet Passive Optical Network (EPON)
ONU for Ethernet Passive Optical Network (EPON)
ONU for Ethernet Passive Optical Network (EPON)
ONU for Ethernet Passive Optical Network (EPON)
ONU for Ethernet Passive Optical Network (EPON)
Request a Quote
KOC-E600-100U Optical Network Unit

This series is a EPON passive optical network equipped with one GE adaptive port that has been linked with OLT telecom giants like Huawei, ZTE, Fiberhome and Alcatel-Lucent. It provides a high quality, flexible and easy-to-maintain optical network connection solution since the demand for broadband communication has grown with the increase of HDTV, IPTV, voice-over-IP(VoIP) and multimedia broadband applications. In line with relevant international standards, the units have a long life expectancy, lower operating costs and support of up to 20km distance between equipment nodes, and offer of much greater bandwidth. The EMS also supports many operating and monitoring functions for ONUs management including ONU auto-detection, auto-registration, testing of link connection, binding of MAC address and filtration, bandwidth control, flow control and multicast stream control.

Features
  • Pure data pattern ONU
  • In line with IEEE802.3ah
  • Maximum reach 20KM
  • Data encryption
  • Traffic suppression and storm control
  • Loop test
  • Continuous-mode ONU detection
  • port-and-protocol based VLAN division
  • port-based performance insight
  • ACL(access-control list) support, flexible processing of data
  • Flexible bandwidth allocation
  • Single LLID configuration, different level of QOS service
  • Three-layer routing
  • Software online update
  • Centralized network management based on SNMP and EMS platform
  • Complete alarm system
Specifications
Port PON interface 1 × EPON interface
1000BASE-PX20
Upstream × Downstream 1.25Gbps
SC/PC Single mode fiber
Maximum split ratio: 1: 64
Maximum reach: 20KM
Ethernet interface 1 × 10/100/1000M adaptive Ethernet interface
Full-duplex/Half-duplex
RJ45 (electrical), Direct cross-connections
Maximum reach 100m
Power interface 12V DC
Performance PON interface (applicable to the PON modules provided by our company) Wavelength: upstream 1310nm,downstream 1490nm
TX power range: 0~4dBm
RX sensitivity: -27dBm
Saturated RX power: -3dBm
Data transmission PON handling capacity: downstream 980Mbps; upstream 950Mbps
Ethernet port: 1000Mbps
Packet loss rate: <1*10E-12
Delay: <1.5ms
Network management Mode OAM based on IEEE802.3ah WEB management
Security Status monitoring, configuration management, alarm management, log management
Physical property Rack White plastic rack
Power Supply & Consumption External 12V0.5ADC power adapter
Consumption:<3W
Size & Weight Size: 78mm(L) x 78mm(W) x25mm (H)
Net weight: 0.1kg
Environment Operating Tem.: 0~50℃
Storage Tem.: -40~85℃
Operating humidity: 10%~90% Non-condensing
Storage humidity: 10%~90% non-condensing
KOC-E600-100W Optical Network Unit

This series optical network unit can work with local devices OLT to implement integrated management, long-distance fault location and decrease maintenance workload. It provides subscriber with rich, individualized, and comfortable service. By adopting state-of-the-art EPON technology, the optical network unit supports various features including Quality of Service function, management function enabling prompt reactions against the problems in the system or a subscriber line, security function protecting subscriber information safe, and subscriber management function sheltering user information from hackers. The device is a very sleek and the metallic case does not feature any fans, resulting in silent operation.

Features
  • In line with IEE802.3ah, China Telecom's technical requirements of EPON equipment (V2.1/V3.0)
  • ONU automatic discovery/link detection/remote upgrade
  • Wi-Fi devices are in line with 802.11 n/b/g wireless standard protocol
  • Configuring transparent transmission of VLAN packets, tag configuration
  • Multicast stream
  • DHCP/Static/PPPOE configuration
  • Port binding
  • OAM TR069 management
  • Data encryption and decryption
  • DBA(dynamic bandwidth allocation)
  • MAC filtering and URL access control
  • Centralized management based on SNMP protocol and EMS
  • Complete alarming function
Specifications
Port PON interface 1 × EPON interface
1000BASE-PX20
Upstream × Downstream 1.25Gbps
SC/PC single mode fiber
Maximum split ratio: 1: 64
Maximum reach: 20KM
Ethernet interface 1 × 10/100/1000M adaptive Ethernet interface
Full-duplex/Half-duplex
RJ45 (electrical), Direct cross-connections
Maximum reach: 100m
Power interface 12V DC
Performance PON interface(applicable to the PON modules provided by our company) Wavelength: upstream 1310nm, downstream 1490nm
TX power range: 0~4dBm
RX sensitivity: -27dBm
Saturated RX power: -3dBm
Data transmission PON handling capacity: downstream 980Mbps; upstream 950Mbps
Ethernet port: 1000Mbps
Packet loss rate: <1*10E-12
Delay: <1.5ms
Network management Mode Centralized management by the local OLT devices through OAM protocol, TR069 support Remote management and WEB management
Security Status monitoring, configuration management, alarm management, log management
Physical property Rack White plastic box
Power Supply & Consumption External power adapter:12V DC/0.5A
Consumption:< 4W
Size & Weight Size:125×80×28mm
Net weight:0.2kg
Environment Operating Tem.: 0~50℃
Storage Tem.: -40~85℃
Operating humidity: 10%~90% non-condensing
Storage humidity: 10%~90% non-condensing
Performance Index Operating mode Route mode and bridge mode
Standard IEEE802.11b/g/n
Frequency domain 2.412 ~ 2.472 GHz
Antenna gain 5dBi
Support rate 802.11b: 1, 2, 5.5, 11Mbps
802.11g: 6, 9, 12, 24, 36, 48, 54Mbps
802.11n: Maximum 300Mbps
Wireless channel 2.4GHz Channel: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
Modulation mode 11b: DSSS:
DBPSK(1Mbps),DQPSK(2Mbps), CCK(5.5/11Mbps)
11g: OFDM:BPSK(6/9Mbps), QPSK(12/18Mbps), 16QAM(24/36Mbps),
Q64QAM(48/54Mbps)
11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM
   
RX sensitivity 11Mbps: ≤-90dBm
54 Mbps: ≤-76dBm
HT20 MCS7: ≤-73dBm
HT40 MCS7: ≤-70dBm
Transmitted power 802.11n: 17dBm
Encryption AES, TKIP, WPA, WPA2, WPA-PSK/WPA2-PSK
KOC-E600-200T Optical Network Unit

This series optical network unit is designed to deliver FTTH Triple play service to subscribers. It adopts high reliability, easy management, configuration flexibility and good quality of service to meet the technical performance of the module of China telecom EPON CTC3.0 and IEEE802.3ah.

EPON enables computer network connections over telecommunications infrastructure. It is a “short haul” network that uses fiber optic cables. Ethernet packets (instead of ATM calls), and a single layer 2 network with a single protocol to deliver internet access, voice over internet protocol (VoIP), and digital TV services in metropolitan areas, among other uses.

The products can work with the OLT local devices, FWDM combiner and EMS network management system developed by our company to provide complete broadband and CATV single-fiber, multi-task access to our customers.

Features
  • In line with IEE802.3ah, China Telecom's technical requirements of EPON equipment (V2.1/V3.0)
  • Maximum reach of 20km
  • Data encryption and decryption
  • Multicast stream
  • ONU automatic discovery/link detection/remote upgrade
  • Port-based VLAN configuration
  • Traffic suppression and storm control
  • Port flow management
  • Centralized management based on SNMP protocol and EMS
  • Complete alarming function
Specifications
Port PON interface 1×EPON electrical port
1000BASE-PX20
Upstream & Downstream 1.25Gbps
SC Single mode fiber
Maximum split ratio: 1: 64
Maximum reach: 20KM
Ethernet interface 1×10/100/1000M adaptive Ethernet interface
Full-duplex/Half-duplex
RJ45(electrical), Direct cross-connections
Maximum reach 100m
1×CATV Port, F Connector
Power interface 12V DC
Performance PON interface
(applicable to the PON modules provided by our company)
Wavelength: upstream 1310nm, downstream 1490nm
TX power range: 0~4dBm
RX sensitivity: -27dBm
Saturated RX power: -3dBm
Data transmission PON handling capacity: downstream 980Mbps; upstream 950Mbps
Ethernet port: 1000Mbps
Packet loss rate: < 1*10E-12
Delay: < 1.5ms
Support L2 Layer wire speed switching
VLAN TAG/UNTAG, VLAN switching
Port speed limit
Business prioritization
Broadcast limit
Loop test
Management Mode Centralized by local OLT devices through OAM protocol;
SNMP, TELNET, local management
Security Status monitoring, configuration management, alarm management, log management
Physical property Rack White plastic rack
Power supply & consumption < 5W External power adapter: 12V/0.5A
Size & Weight Size: 130mm(L) x90mm(W) x 30mm (H)
Weight: 0.2kg
Environment Operating Tem.: 0~50℃
Storage Tem.: -30~60℃
Operating humidity: 10%~90% (non-condensing)
Storage humidity: 5%~95% (non-condensing)
KOC-E600-400PW Optical Network Unit

With two POTS, four 10/100/1000M adaptive Ethernet ports, 802.11a/b/g/n/ac standard WIFI interface and one USB port, the devices have already been linked to the EPON local OLT of mainstream telecom manufacturer such as Huawei, ZTE, Fiberhome and Alcatel-Lucent. The devices can meet the requirements of FTTH (fiber to the home) and provide users with high broadband access based on EPON, and quality data, video and voice services. EPON has the advantage of high efficiency, high bandwidth, rich user interface and excellent coverage. The access network is regarded by the most operators as a broadband technology and an integrated ideal technology transformation. Their stability to operate and flexibility of capacity expansion and networking makes it easy and cost-effective to deliver uncompromising triple play services throughout the service area.

Features
  • In line with IEEE802.3ah
  • MAC and Password registration
  • Power down and on/off line alarming
  • 802.11 b/g/n Wi-Fi standard access
  • USB interface backup configuration
  • OAM TR069
  • Ethernet self-negotiation and MDI/MDIX auto detection
  • Ethernet performance insight
  • VLAN tag/untag, support, flow classification and packet filtering
  • DHCP server and client
  • PPPOE dial-up networking
  • H.248 and SIP VoIP
  • IGMP Snooping/Proxy
  • Encryption and decryption of Cocktail shaker sort
  • Dual management mode based on DBA technology and priority to ensure the minimum bandwidth
WIFI Features
  • In line with IEEE802.11n, 2.4 GHz
  • Completely compatible with the traditional IEEE802.11b/g and have improvement
  • MIMO technology, rate of PPDU can reach 300Mbps
  • Multi SSID(a maximum of 4 SSID)
  • Bandwidth up to 40MHz
  • Automatic channel selection
  • Hidden SSID support
  • Wireless security of 64/128 bit WEP, 802.1x, WPA and WPA2
Specifications
Port PON port 1 × EPON electrical interface
1000BASE-PX20
Upstream & downstream 1.25Gbps
SC single mode fiber
Maximum split ratio: 1:64
Maximum reach:20KM
User port(LAN) 4 × 10/100/1000M adaptive Ethernet interface
Full-duplex/Half-duplex
RJ45 (electrical), Direct cross-connections
Maximum reach 100m
User port(voice) Number 2
Connector RJ-11
Maximum reach 1km
X-liter 3REN(3 x-liters)
Bell–vibrating voltage Vrms>50V
USB port Number 1
Type USB2.0
Transmission rate 480Mbps
Power interface 12V DC
Network management Mode OAM based on IEEE802.3ah
TR-O69 remote management and WEB management
Security Status monitoring, configuration management, alarm management, log management
Physical property Rack Plastic rack
Power supply & consumption External power adapter: 12V/1A DC
Consumption: < 7W
Size & Weight Size:170mm(L)*130mm(W)*30mm(H) N
et weight: 0.3kg
Environment Operating Tem.: 0~50℃
Storage Tem.: -40~85℃
Operating humidity: 10%~90% non-condensing
Storage humidity: 10%~90% non-condensing
Performance Index Operating mode Route mode and bridge mode
Antenna gain 5dBi
WIFI antenna 2 ×external antenna
Line rate IEEE 802.11b: 11Mbps
IEEE 802.11g: 54 Mbps
IEEE 802.11n: 300Mbps
Frequency domain 2.412 ~ 2.472 GHz
Channel 13 channels. Can be configured to the standard of USA, Canada, Europe, Japan, China and other regions
Modulation mode DSSS , CCK and OFDM
Coding scheme BPSK, QPSK, 16QAM and 64QAM
RX sensitivity 802.11b:
-83dBm @ 1 Mbps; -79dBm @ 5.5 Mbps; -76dBm @ 11 Mbps
802.11g:
-85dBm @ 6 Mbps; -77dBm @ 24 Mbps;
-68dBm @ 54 Mbps;
802.11n HT20:
-85dBm @ MCS0; -73dBm @ MCS4;
-67dBm @ MCS7
802.11n HT40:
-82dBm @ MCS0; -70dBm @ MCS4;
-64dBm @ MCS7
Transmitted power 802.11b:
19 ± 1dBm @ 1 Mbps 19±1dBm @ 5.5 Mbps; 18 ±1dBm @ 11 Mbps;
802.11g:
18 ± 1dBm @ 6 Mbps 17±1dBm @ 24 Mbps; 16 ±1dBm @ 54 Mbps;
802.11n HT20:
17 ± 1dBm @ MCS0; 16 ± 1dBm @ MCS4 ;
15 ± 1dBm @ MCS7
802.11n HT40:
17 ± 1dBm @ MCS0; 16 ± 1dBm @ MCS4 ;
15 ± 1dBm @ MCS7
Encryption 802.11i security: WEP-64/128, TKIP (WPA-PSK) and AES (WPA2-PSK)
KOC-E600-400U Optical Network Unit

The pure data pattern ONU devices is passive optical network products on the user side. The optical network unit can corporate with OLT to provide broadband access solutions based on EPON technology.

EPON technology combined the technical advantages of PON technology and Ethernet. The local OLT devices can link with several ONU devices through the passive optical network. They can meet the requirement of multi users by the least optical fiber resources.

The optical network units are in line with IEE802.3ah, China Telecom's technical requirements of EPON equipment (V2.1/V3.0). They are well compatible with the local OLTs of mainstream manufacturer. The devices support 1Gbps transmitting rate for both upstream and downstream transmission. They provide users with optimal QOS, flexible bandwidth allocation and complete IP services.

Features
  • In line with IEE802.3ah, China Telecom's technical requirements of EPON equipment (V2.1/V3.0), maximum reach of 20km
  • Data encryption, multicast and VLAN
  • DBA(dynamic bandwidth allocation)
  • ONU automatic discovery/link detection/remote upgrade
  • Port-based VLAN configuration
  • Traffic suppression and storm control
  • Separation of different data port
  • Port flow management
  • Centralized management based on SNMP protocol and EMS
  • Complete alarming function
Specifications
Port PON port 1×EPON interface
1000BASE-PX20
Upstream & downstream 1.25Gbps
SC/UPC single mode fiber
Maximum split ratio: 1:64
Maximum reach:20KM
Ethernet interface 4×10/100M or 4×10/100/1000M adaptive Ethernet port
Full-duplex/Half-duplex
RJ45 (electrical), Direct cross-connections
Maximum reach 100m
Power interface 12V DC
Performance PON interface
(applicable to the PON modules provided by our company)
Wavelength: upstream 1310nm, downstream 1490nm
TX power range: 0~4dBm
RX sensitivity: -27dBm
Saturated RX power: -3dBm
Data transmission PON handling capacity: downstream 980Mbps; upstream 950Mbps
Ethernet port: 1000Mbps
Packet loss rate: <1*10E-12
Delay: <1.5ms
Support L2 Layer wire speed switching
VLAN TAG/UNTAG, VLAN switching
Port speed limit
Business prioritization
Broadcast limit
Loop test
Management Mode Centralized by local OLT devices through OAM protocol;
SNMP, TELNET, local WEB management
Security Status monitoring, configuration management, alarm management, log management
Physical property Rack White plastic rack
Power supply & consumption 4FE: <3W, 12V/0.5A
4GE: <4W, 12V/0.5A
Size & Weight Size: 160mm(L) x 120mm(W) x 32.5mm (H)
Weight: 0.2kg
Environment Operating Tem.: 0~50℃
Storage Tem.: -40~85℃
Operating humidity: 10%~90% (non-condensing)
Storage humidity: 10%~90% (non-condensing)
KOC-E600-400U Optical Network Unit

The devices are dual frequency data pattern passive optical network units designed for broadband based on EPON technology. The optical network units can cooperate with EPON OLT to provide a complete broadband solution based on EPON technology.
EPON technology is a point-to-point networking technology combining the advantages of PON technology and Ethernet. The system can provide multi-user access with limited optical fiber resources.

The optical network units are in line with various international standards such as IEEE802.3ah. They are compatible with the local OLT devices of mainstream telecom manufacturers. With a high transmitting rate of 1Gdps, the devices can provide quality QOS, flexible bandwidth allocation, Ethernet and IP business.

The dual frequency ONU can operate wirelessly, also support dual frequency of 2.4GHz and 5GHz. With strong penetration and wide coverage, they can provide users with more efficient data transmission.

Features
  • In line with IEEE802.3ah, use EPON uplink
  • WIFI series is in line with 802.11a/b/g/n/ac wireless protocol
  • ONU automatic discovery/link detection/remote upgrade
  • Ethernet performance insight
  • OAM TR069 management
  • VLAN tag/untag
  • Multicast Snooping/Proxy
  • DHCP/PPPOE/Static IP configuration
  • Port binding
  • Loop testing
  • Whole machine speed limit
  • MAC filtration and WAN access control
  • Encryption and decryption of triple Cocktail shaker sort
  • Dual management mode based on DBA technology and priority to ensure the minimum bandwidth
  • Centralized network management based on SNMP protocol and EMS
  • Complete alarming system
WIFI Features
  • In line with IEEE802.11a/b/g/n/ac, support 2.4GHz and 5GHz
  • Total 4 antennas, 2 external and 2 internal
  • Antenna gain of 5dBi
  • Maximum theory rate 1.2Gbps
  • 2*2 MIMO technology at 2.4GHz and 5GHz
  • Support 8 SSID
  • Support wide RF bandwidth up to 80MHz
  • 256-QAM support
  • MIMO-OFDM encoding type
  • Wireless security of 64/128 bits WEP,802.1x,WPA and WPA2
Specifications
Port PON port 1×EPON optical port
1000BASE-PX20
Upstream & Downstream 1.25Gbps
SC/PC Single mode fiber
Maximum split ratio: 1:64
Maximum reach: 20KM
Ethernet interface 1 × 10/100/1000M adaptive Ethernet interface
Full-duplex/Half-duplex
RJ45 (electrical), Direct cross-connections
Maximum reach 100m
Power interface 12V DC
Performance PON interface
(applicable to the PON modules provided by our company)
Wavelength: upstream 1310nm, downstream 1490nm
TX power range: 0~4dBm
RX sensitivity: -27dBm
Saturated RX power: -3dBm
Data transmission PON handling capacity: downstream 980Mbps; upstream 950Mbps
Ethernet port: 1000Mbps
Packet loss rate: <1*10E-12
Delay: <1.5ms
Network management Mode OAM based on IEEE802.3ah
TR-O69 remote management and WEB management
Security Status monitoring, configuration management, alarm management, log management
Physical property Rack White plastic rack
Power Supply & Consumption External power adapter: 12V/1A DC
Consumption: < 7.5W
Size, Weight Size:160mm(L) x 120mm(W) x 32.5mm (H)
Net weight: 0.2kg
Environment Operating Tem.: 0~50℃
Storage Tem.: -40~85℃
Operating humidity: 10%~90% (non-condensing)
Storage humidity: 10%~90% (non-condensing)
Related products
Send Message
Other Products
Inquiry
Inquiry