Solar Collector with Connecting Pipe (Vertical)
Request a Quote
The first one company who get SOLAR KEYMARK certificate
Overview
Himin's manifold collector includes the high efficiency vacuum tube. The exclusive use of the most advanced sputtered double cermet selective absorber coating gives the tube a 0.94 ≤ absorptivity ≤ 0.96 and 0.04 ≤ emissivity ≤ 0.06. The manifold collector has water inside the glass tube, and a bracket that goes with the collector. The water circulation is carried out inside the collector header, the tubes, and the water storage tank. Put together, each of those components makes up a direct system that is easily used in commercial solar hot water systems.
Characteristic | Valve |
Tube L/OD | 2100mm/58mm |
Tube no. | 30PCS |
Overall Length | 2930mm |
Overall Width | 2390mm |
Absorber Area | 2.85㎡ |
Aperture Area | 3.34㎡ |
Gross Area | 7㎡ |
Max Operating Pressure | 0kPa |
Characteristic | Valve |
Vacuum tube | Borosilicate 3.3 Glass |
Kind of Selective Coating | AlN/AIN-SS/Cu on glass |
Header Tube | SUS304 |
Header Casing | SPGC with Color |
Header Inlet/Outlet | DN25 with male thread |
Insulation | Polyurethane |
Rubber Components | EPDM Silicone Rubber |
Mounting Frame | Hot-dip Galvanized Steel/4mm |
Characteristic | Valve |
Efficiency | 0.737 |
Heat Loss co efficiency | 2.81W/(㎡·K) |
Collector Array Quantity | 6 |
Installation Angle | 15-70° |
Form
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos