Solar Collector with Connecting Pipe (Horizontal)
Request a Quote
Himin manifold collector JPH-50TX18
Key Material Properties
Performance Properties
Installation Guidelines
Product specification sheet
Overview
Himin's manifold collector includes the high efficiency vacuum tube. The exclusive use of the most advanced sputtered double cermet selective absorber coating gives the tube a 0.94 ≤ absorptivity ≤ 0.96 and 0.04 ≤ emissivity ≤ 0.06. The manifold collector has water inside the glass tube, and a bracket that goes with the collector. The water circulation is carried out inside the collector header, the tubes, and the water storage tank. Put together, each of those components makes up a direct system that is easily used in commercial and industrial solar hot water systems.
Characteristic | Valve |
Tube L/OD | 1800mm/58mm |
Tube no. | 50PCS |
Overall Length | 3672mm |
Overall Width | 2450mm |
Absorber Area | 4.05m2 |
Aperture Area | 4.71m2 |
Gross Area | 7.6m2 |
Max Operating Pressure | 0.1MPa |
Weight, full of water | 337kg |
Characteristic | Valve |
Vacuum tube | Borosilicate 3.3 Glass |
Kind of Selective Coating | AlN/AIN-SS/Cu on glass |
Header Tube | SUS304/0.8mm |
Header Casing | SPGC with Color/0.5mm |
Header Inlet/Outlet | DN25 |
Insulation | Polyurethane |
Rubber Components | EPDM Silicone Rubber |
Mounting Frame | Hot-dip Galvanized Steel/4mm |
Characteristic | Valve |
Efficiency | 0.66 (aperture area) |
Heat Loss co efficiency | 2.8W/(m2·K) |
Installation Angle | 0-90° |
Form
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos