IGBT Inverter Plasma Cutter with High Frequency Arc Start

IGBT Inverter Plasma Cutter with High Frequency Arc Start
IGBT Inverter Plasma Cutter with High Frequency Arc Start
IGBT Inverter Plasma Cutter with High Frequency Arc Start
IGBT Inverter Plasma Cutter with High Frequency Arc Start
Request a Quote

Main Parameters
Cutting Thickness: 30mm
Applicable Power Supply: Three Phase
Rated Input Voltage: 380V
Rated Input Power: 10.5kW-23kW
Rated Input Current: 17.2A-37.6A
Open Circuit Voltage: 300V
Protection Class: IP23
Insulation Class: H
Cooling System: Forced air cooling

Our CUT80/100/120/160H series IGBT inverter plasma cutter features an outstanding durability and works with an HF (high frequency) arc start mode. The cutter is designed to work with a three phase power supply.

It is widely used for the cutting of metal plates or tubing in a variety of industries, including steel construction, manufacturing industry and automotive repair and restoration. Typical materials cut with the plasma cutter include steel, stainless steel, aluminum, lead, titanium, nickel-based composite metal, cast iron, and more.

Features
  • Our CUT80/100/120/160H series IGBT inverter plasma cutter works with a default HF (high frequency) arc start mode to ensure an easy arc striking. Plasma cutters with a non-HF start mode are also available.
  • The IGBT inverter works with a frequency up to 100kHz, thus ensuring the plasma arc has access to a concentrated energy. As a result, a, high cutting speed, clean and smooth cut and very little distortion are all achieved.
  • The plasma torch's forced air cooling system ensures a high efficiency cooling, thus significantly enhancing the service life of all torch components.
  • The front panel is designed with a knob for adjusting the gas pressure and a digital display screen for visual display of the cutting current.
  • Built-in overheat, overcurrent, overvoltage, and under voltage protection circuit ensures safe operation.
  • Both regular 2T and semi-automatic 4T modes are supported, accommodating different operating habits. In 2T mode, the operator will need to hold the switch down during the entire cutting process. Once the switch is released, cutting stops. In 4T mode, the operator simply needs to toggle the switch on, let go and then cut and toggle it off when finished.
Technical Parameters
Model CUT80H CUT100H CUT120H CUT160H
Cutting Thickness 30mm 30mm 30mm 30mm
Rated Input Voltage 3P 380V 3P 380V 3P 380V 3P 380V
Frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz
Rated Input Power 10.5KW 14.1KW 18.1KW 23.0KW
Rated Input Current 17.2A 23.1A 29.5A 37.6A
Output Current Range 30-80A 30-100A 30-120A 30-160A
Duty Cycle (40°C 10min) 60%80A,
100%62A
60%100A,
100%77A
60%120A,
100%93A
60%160A,
100%124A
Open Circuit Voltage 300V 300V 300V 300V
Efficiency Above 85% Above 85% Above 85% Above 85%
Power Factor 0.73 0.73 0.73 0.73
Protection Class Ip23 Ip23 Ip23 Ip23
Insulation Class H H H H
Cooling System AF AF AF AF
N.W 28.0KG 28.5KG 40.0KG 56.0KG
G.W. 32.5KG 33.0KG 42.0KG 59.0KG
Packing Dimension 640×440×535mm 640×440×535mm 710×440×605mm 800×470×635mm




Customization
The appearance, cutting current, product manuals and packaging can all be customized according to customer requirements.

Accessories
  • Plasma Torch
  • Earth Clamp
  • Mask
  • Hammer Brush
  • PU Tubing
Related products
Send Message
Other Products
Inquiry
Inquiry