SMD Hot Tweezer Soldering Station, Item WEP-938D
Request a Quote
The hot tweezer soldering station comes with two soldering irons; you can either use an individual soldering iron or both simultaneously with different time settings. This is best fit for two operators due to the personalized design.
ParametersTemperature Range | 100°C~480°C/212°F~896°F |
Display | LCD |
Temperature Stability | ±2°C (Static) |
Heating Coil Voltage | AC 24V ±10% 50Hz |
Tip to Ground Impedance | <2Ω |
Tip of Ground Voltage | <2mV |
dimension | L150xW136xH93mm ±5mm |
Wire Length | ≥120cm |
Working Temperature | 0~40°C/32°F~104°F |
Storage Temperature | -20°C~80°C/-4°F~176°F |
Storage Humidity | 35%~45% |
- Backlit LCD display with delicate design displays the accurate temperature of each soldering iron, as well as some other functions.
- Personalized Functions:
A.3-segment Parameter Storage Function:
Memory function stores different parameters and allows for quick retrieval for future uses in three different temperature ranges: CH1/CH2/CH3.
B. Interchangeable temperature display mode:
Temperature display mode changes between Celsius and Fahrenheit according to different markets.
C. Sleep Mode:
The soldering rework station has status a self-detection function, if the equipment is in static motion for a set time, the system will go to sleep and the temperature of soldering iron will decrease to 100℃. This function can effectively prevent the soldering iron from oxidizing, which prolongs the lifespan as well saves energy.
D. Auto Power-off Function:
The system will count down once the machine is in sleep mode, if the rework station is not activated again in set time, the machine will automatically power-off to save energy.
E. Temperature Correction Function:
The rework station can automatically correct the temperature due to environmental changes or the replacement of the heating coil, solder iron or other components with a temperature correction range of -50℃ ~ 50℃. - The touch interface adopts intelligent virtual buttons with excellent sensitivity, fast response, stable performance and delicate appearance.
Standard Configuration
Machine: 1pc
Soldering iron handle (including tip and heater): 2pcs
Titanium alloy holder: 1pc
Rosin flux: 1 box
Instruction book: 1pc
If you need quick after-sales support
Please don't hesitate to send an email to !
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos