8104 Wrench with Pin

8104 Wrench with Pin
Request a Quote

Constructed with pin, the code No.8104 stainless steel wrench features the sharp tail, which is suitable for a variety of uses. It is made of stainless steel processed by drop forging.

304QF stainless steel tools technical parameters:
Chemical composition: %
C Si Mn Cr Ni S P N
≤0.08 ≤0.85 ≤1.8 18.0-20 8.0-10.5 ≤0.03 ≤0.045 ≤0.2
Physical property
  • Tensile strength: σb(MPa)≥520
  • Tensile strength: σb(MPa)≥520
  • Offset yield strength:σ0.2(MPa)≥205
  • Elongation:δ5(%)≥40
  • Contraction percentage of area: z(%)=60
  • Density (20℃, g/cm3): 7.93
  • Hardness: HRC15-25
  • Melting point (℃): 1398~1454
  • Specific heat (0~100℃, KJ·kg-1K-1): 0.50
  • Heat conductivity (W·m-1·K-1): (100℃) 16.3, (500℃) 21.5
  • Linear expansion coefficient (10-6·K-1): (0~100℃) 17.2; (0~500℃) 18.4
  • Resistivity (20℃, 10-6Ω·m): 0.73
  • Magnetism: ≤5nT within 10cm in the magnetic field

Martensitic stainless steel (cutting tools stainless steel): representative grade: 420
The mechanical property of martensitic stainless steel is adjustable by heat treatment. Generally speaking, it is a type of hardenable stainless steel. It is hardened after quenching. Different tempering temperatures give different combinations of hardness and toughness. This stainless steel is widely used in such industries where the requirements of corrosion resistance is not very high, plus the cutting tools and machine elements have high requirements on strength.

420 stainless steel tools parameters:
Chemical composition: %
C Si Mn Cr Ni S P
0.16-0.25 ≤1.00 ≤1.00 12.0-14.0 ≤0.75 ≤0.03 ≤0.04
Physical property
  • Tensile strength: σb(MPa)≥365
  • Offset yield strength:σ0.2(MPa)≥440
  • Elongation:δ5(%)≥20
  • Contraction percentage of area: z(%)=50
  • Density (20℃, g/cm3): 7.75
  • Hardness: HRC35-45
  • Melting point (℃): 1427
  • Specific heat (25℃, J·kg-1K-1): 460
  • Heat conductivity (W·m-1·K-1): 24.9
  • Linear expansion coefficient (mm/℃): (at20-100℃)
Parameters:
Number S (mm) L (mm) Weight (g)
8104-17 17 320 210
8104-19 19 350 320
8104-22 22 350 430
8104-24 24 370 480
8104-27 27 370 640
8104-30 30 400 800
8104-32 32 400 800
8104-36 36 430 950
8104-41 41 470 1270
8104-46 46 500 1600
Related products
Send Message
Other Products
Inquiry
Inquiry