Lifting Type Window Cleaning Machine

Lifting Type Window Cleaning Machine
Request a Quote

Our lifting type window cleaning machine is very useful for the maintenance of high building. Its gondola is equipped with the hoist and safety lock, and can be used onto different suspension mechanisms, so the goal of making our machine multifunctional can be achieved. The installation of the hoist brings the gondola a heavy dead load, and the gondola is in need of power supply, so the length of suspension arm is limited, and some of the buildings are too high to be reached. On the other hand, the cost of our lifting type product has much lower cost of manufacture than our winch type product. Being equipped with different suspension mechanism, many parts of our lifting type window cleaning machine can be flexible, such like the trolley can walk, the sweep can rotate, stretch and pitch, the gondola can swing, go up and down, etc. We provide the product of different models as following.

Vertical Rail Mounted Type

Our vertical rail mounted machine has the ability of walking on the parapet wall and can work on a narrow roof.

Horizontal Rail Mounted Type

Our horizontal rail mounted machine can walk on the rail which is installed on the roof of high building, and takes up only a little space. It can be driven by the electric power or manually. Despite the function of lifting up and down, it is just like our small winch type window cleaning device.

Socket Inserted Mast Type

Our socket inserted mast type window cleaning machine can be directly fixed onto the parapet on the top of the building. It has the vertical and horizontal types, and the two types can work together. Because of the heavy weight, this product is hard to be moved, and become not popular. However, it is still needed in the places where has the complicated roof and many corners the large window cleaning device can not reach.

Non-Rail Mounted Trolley Type

Our non-rail mounted trolley window cleaning machine can be driven by hand or electric power to move freely on the roof. It is quite flexible and convenient to be operated, and stored. For the information, the floor that loads our machine should have the high enough strength.

Suspended Rail Type

Our suspended rail type equipment consists of the suspended gondola and electric powered climbing rail device. It can move along the rail suspended around the building, and can be applied to the buildings which have long roof overhang, inner concave out or siamesed corridor.

Suspended Gondola

Technical Parameters

Name Parameter
Rated Load100kg
Max. lifting height150m
Lifting Speed7-9m/min
Basket Dimension(mm)2600×650×1100
Distance between Suspended Points of the Wire Rope 2000mm
Hoist Type LTD6.3Electric wire winderType JP100Safety lock Type LSB30Ⅱ
Lifting load 630kgStructure principle Speeding friction skidStructure principleAnti-tilting type
Motor Power 2×1.5kWMot or Full lock 2×0.18kWRated load>800 kg
Voltage 380VVoltage 380VRope Distance<100mm
Rotate speed 1420r/minRotate speed 1400r/minRope angle 3-8°
Diameter of wire rope 8.3mm
Total weight 660kg(include wire rope and cable)

Seated Type

Our seated type window cleaning machine applies to buildings have narrow space and gallery; any other type cannot be applied.

Technical Parameters

NameParameter
Rated Load100kg
Lifting Speed7-9m/min
Basket Dimension450*520*1600
Steel WireSpecial made
Hoist Rated Lift Force3KN
TypeYEJ801-4
Power0.75KW
Voltage 380V
Rotate Speed1400r/min
Brake Torque0.75N.m
Lock Safety RopeLock EquipmentPermissible Force of Impact4.9kN
Rope Distance﹤200mm
Breaking Force of Safety Rope﹥22kN
Total Weight80kg
Related products
Send Message
Other Products
Inquiry
Inquiry