General Fumed LSR for Watch Band & Tableware (Injection Molding)
Request a Quote
Applications
This liquid silicone rubber (LSR) is applicable to produce a variety of silicone smartwears, tableware, watch bands, sealing rings, protective face masks, etc.
Features
- Rapid vulcanization, good processability;
- Non-toxic and safe, food grade;
- High tear strength, non-yellowing, good aging resistance;
Approvals
ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, Dimethyl Cyclosiloxane, etc.
Test
Rheometer test, 120℃, 5min
Technical Data
- Model:
HT-L7200A/B - Appearance: Translucent
- Viscosity: 30W-39W
- Hardness (Shore A): 20
- Density (g/cm3): 1.06
- Tensile strength (Mpa): 6
- Elongation (%): 800
- Tear strength (K N/m): 15
- Model:
HT-L7300A/B - Appearance: Translucent
- Viscosity: 30W-39W
- Hardness (Shore A): 30
- Density (g/cm3): 1.08
- Tensile strength (Mpa): 6
- Elongation (%): 700
- Tear strength (K N/m): 15
- Model:
HT-L7400A/B - Appearance: Translucent
- Viscosity: 40W-49W
- Hardness (Shore A): 40
- Density (g/cm3): 1.1
- Tensile strength (Mpa): 7
- Elongation (%): 650
- Tear strength (K N/m): 20
- Model:
HT-L7500A/B - Appearance: Translucent
- Viscosity: 40W-49W
- Hardness (Shore A): 50
- Density (g/cm3): 1.12
- Tensile strength (Mpa): 7
- Elongation (%): 600
- Tear strength (K N/m): 25
- Model:
HT-L7600A/B - Appearance: Translucent
- Viscosity: 40W-49W
- Hardness (Shore A): 60
- Density (g/cm3): 1.12
- Tensile strength (Mpa): 7
- Elongation (%): 500
- Tear strength (K N/m): 30
- Model:
HT-L7700A/B - Appearance: Translucent
- Viscosity: 40W-49W
- Hardness (Shore A): 70
- Density (g/cm3): 1.14
- Tensile strength (Mpa): 8
- Elongation (%): 400
- Tear strength (K N/m): 30
- Model:
HT-L7800A/B - Appearance: Translucent
- Viscosity: 40W-49W
- Hardness (Shore A): 80
- Density (g/cm3): 1.14
- Tensile strength (Mpa): 7
- Elongation (%): 260
- Tear strength (K N/m): 20
Related Manufacturies
Leave Message
Similar Manufacturies and Parts
Manufacturer Advertising
More
Similar Manufacturies and Parts
Videos
