Aluminum Channels
JMA offers extruded aluminum channels in a wide range of dimensions, including architectural channels, C channels, Z channels, U channels and more. The most commonly used aluminum channels are U channels, and U channels are again separated into equal channels and unequal channels.
JMA has pre-made dies for all of the following U channels, so that we are ready for mass production. We also offer custom manufacturing of U channels based on specific customer requirements, all at an exceptional efficiency and fair price.
Aluminum equal channelSerial No. | A (mm) | B (mm) | T (mm) | (kg/m) |
JM2036 | 7 | 15 | 1.0(with round corners) | 0.102 |
JM2081 | 8.1 | 10 | 1.0(with round corners) | 0.075 |
JM2U6 | 11 | 15 | 1.0 | 0.114 |
JM2023 | 11.5 | 10 | 1.0 | 0.086 |
JM2037 | 12 | 31 | 3×1.3(with slots) | 0.318 |
JM2728 | 12 | 13 | 1.2 | 0.125 |
JM2055 | 14.9 | 35.3 | 1.5 | 0.362 |
JM2034 | 15 | 20 | 2.5 | 0.366 |
JM2780 | 18 | 10 | 1.4 | 0.145 |
JM2742 | 18.5 | 40 | 3.0 | 0.812 |
JM2028 | 19 | 12.7 | 1.8 | 0.215 |
JM2028A | 19 | 12.7 | 1.8(with slots) | 0.211 |
JM2038 | 20 | 12 | 1.5 | 0.180 |
JM2078 | 20 | 33 | 2.5 | 0.593 |
JM2022 | 21 | 12 | 1.0 | 0.126 |
JM2039 | 25 | 13 | 1.0/1.5 | 0.144/0.211 |
JM2046 | 25 | 8 | 2.0(with round corners) | 0.22 |
JM2077 | 25 | 33 | 2.5 | 0.63 |
JM2089 | 25 | 19 | 3.0 | 0.5 |
JM2070 | 27.5 | 13 | 1.0 | 0.151 |
JM2796 | 28 | 20 | 1.3 | 0.247 |
JM2094 | 30 | 15 | 2.0 | 0.328 |
JM2110 | 30 | 20 | 2.0 | 0.387 |
JM2121 | 30 | 25 | 3.0 | 0.65 |
JM2091 | 31 | 20 | 2.5 | 0.483 |
JM2006 | 31.7 | 12.7 | 1.0 | 0.161 |
QX-CL1 | 34 | 19 | 3.5 | 0.666 |
JM2061 | 34 | 35 | 5.0 | 1.376 |
JM2115 | 34.8 | 15 | 2.0(with round corners) | 0.352 |
JM2052 | 35 | 30.2 | 4.8×4(with round corners) | 1.092 |
JM2803 | 37 | 40 | 4.0 | 1.277 |
JM2002 | 38 | 13 | 1.0 | 0.181 |
JM2029 | 38 | 20 | 0.9 | 0.201 |
CH108 | 38.1 | 19 | 2.0 | 0.422 |
JM2095 | 40 | 20 | 3.0 | 0.65 |
JM2095A | 40 | 20 | 2.0 | 0.445 |
JM2816 | 42 | 40 | 3.0 | 1.018 |
JM2113 | 47.8 | 30 | 1.2 | 0.370 |
JM2062 | 49 | 10 | 1.5 | 0.289 |
JM2008 | 50 | 13 | 1.2/1.5 | 0.258/0.321 |
JM2033 | 50 | 6.5 | 2.0(with slots) | 0.343 |
JM2107 | 50 | 25 | 2.0 | 0.559 |
JM2111 | 50 | 30 | 4.0 | 1.194 |
JM2815 | 50 | 60 | 3.0 | 1.440 |
JM2065 | 50.8 | 12.7 | 1.0 | 0.217 |
JM2088 | 52 | 23 | 2.0 | 0.550 |
JM2744 | 54.5 | 38 | 4.0 | 1.433 |
JM2096 | 60 | 30 | 3.0 | 1.001 |
JM2739 | 60 | 25 | 1.4 | 0.440 |
JM2808 | 65 | 45 | 5.0 | 2.122 |
JM2765 | 66.5 | 50 | 3.0 | 1.409 |
JM2041 | 68 | 10 | 4×5(with round corners) | 0.967 |
JM2047 | 70 | 26 | 2.0(with round corners) | 0.694 |
JM2048 | 70 | 40 | 2.0(with round corners) | 0.859 |
JM2083 | 73 | 13 | 1.0 | 0.284 |
JM2102 | 73 | 13 | 1.0 | 0.283 |
JM2053 | 76 | 23 | 1.0/1.5 | 0.351/0.523 |
JM2056 | 76 | 19 | 1.5×2(with round corners) | 0.534 |
JM2106 | 76 | 33.5 | 1.1 | 0.454 |
JM2842 | 77 | 20 | 3.0 | 0.974 |
JM2101 | 79.6 | 12 | 1.2 | 0.354 |
JM2040 | 80 | 15 | 1.1 | 0.347 |
JM2042 | 80 | 18 | 6.0(with round corners) | 1.824 |
JM2846 | 80 | 40 | 2.5 | 1.134 |
JM2043 | 82 | 15 | 1.2 | 0.384 |
JM2079 | 82 | 13 | 1.0 | 0.31 |
JM2097 | 84.5 | 16 | 1.2 | 0.401 |
JM2123 | 85.5 | 16 | 1.2 | 0.404 |
JM2044 | 88 | 23 | 1.0 | 0.387 |
JM2058 | 88 | 13 | 1.0 | 0.328 |
JM2059 | 88 | 18 | 1.1 | 0.392 |
JM2049 | 92.5 | 26 | 2.0(with round corners) | 0.826 |
JM2769 | 93.5 | 30 | 3.7 | 1.582 |
JM2781 | 93.5 | 30 | 3.7 | 1.582 |
JM2800 | 93.7 | 40 | 3.9 | 1.893 |
JM2100 | 99 | 25 | 1.2 | 0.515 |
JM2015A | 100 | 13 | 1.2 | 0.434 |
JM2020 | 100 | 23 | 1.2 | 0.504 |
JM2057 | 100 | 25 | 1.8 | 0.771 |
JM2068 | 100 | 50 | 3.0 | 1.703 |
JM2090 | 100 | 20 | 2.5 | 0.988 |
JM2105 | 102 | 53.5 | 1.4 | 0.846 |
JM2064 | 104.5 | 25 | 1.0 | 0.446 |
JM2812 | 110 | 50 | 3.0 | 1.792 |
JM2025 | 120 | 24 | 2.0 | 0.96 |
JM2801 | 123.7 | 40 | 3.9 | 2.236 |
JM2104 | 124 | 53.5 | 1.4 | 0.935 |
JM2032 | 140 | 90 | 2.0(with round corners) | 1.919 |
JM2109 | 140 | 60 | 7×10(with round corners) | 5.986 |
JM2035 | 150 | 15 | 1.5 | 0.778 |
JM2072 | 150 | 80 | 12.0 | 10.042 |
JM2064A | 155 | 25 | 1.5 | 0.887 |
JM2073 | 160 | 50 | 12(with round corners) | 8.286 |
JM2073A | 160 | 75 | 12(with round corners) | 10.072 |
JM2092 | 172 | 4.5 | 2.5 | 1.287 |
JM2063 | 185 | 70 | 10×15(with round corners) | 10.694 |
JM2067 | 230 | 75 | 5.0(with round corners) | 5.412 |
JM2075 | 347 | 120 | 20.0 | 32.025 |
umber | Height(B) | Width(A) | Thickness(T) | Weight |
(mm) | (mm) | (mm) | (kg/m) | |
JM2036 | 7 | 15 | 1.0 (with round corners) | 0.102 |
JM2081 | 8.1 | 10 | 1.0 (with round corners) | 0.075 |
JM2U6 | 11 | 15 | 1 | 0.114 |
JM2023 | 11.5 | 10 | 1 | 0.086 |
JM2037 | 12 | 31 | 3×1.3 (with slots) | 0.318 |
JM2728 | 12 | 13 | 1.2 | 0.125 |
JM2055 | 14.9 | 35.3 | 1.5 | 0.362 |
JM2034 | 15 | 20 | 2.5 | 0.366 |
JM2780 | 18 | 10 | 1.4 | 0.145 |
JM2742 | 18.5 | 40 | 3 | 0.812 |
JM2028 | 19 | 12.7 | 1.8 | 0.215 |
JM2028A | 19 | 12.7 | 1.8 (with slots) | 0.211 |
JM2038 | 20 | 12 | 1.5 | 0.18 |
JM2078 | 20 | 33 | 2.5 | 0.593 |
JM2022 | 21 | 12 | 1 | 0.126 |
JM2039 | 25 | 13 | 1.0/1.5 | 0.144/0.211 |
JM2046 | 25 | 8 | 2.0 (with round corners) | 0.22 |
JM2077 | 25 | 33 | 2.5 | 0.63 |
JM2089 | 25 | 19 | 3 | 0.5 |
JM2070 | 27.5 | 13 | 1 | 0.151 |
JM2796 | 28 | 20 | 1.3 | 0.247 |
JM2094 | 30 | 15 | 2 | 0.328 |
JM2110 | 30 | 20 | 2 | 0.387 |
JM2121 | 30 | 25 | 3 | 0.65 |
JM2091 | 31 | 20 | 2.5 | 0.483 |
JM2006 | 31.7 | 12.7 | 1 | 0.161 |
QX-CL1 | 34 | 19 | 3.5 | 0.666 |
JM2061 | 34 | 35 | 5 | 1.376 |
Note: Provided cross section, serial number, dimension and weight are for reference only.
Not only do we produce U channels, but we also manufacture custom aluminum channels in a great variety of styles and dimensions, such as architectural channels, C channels, Z channels, slide track channels, hat channels and aluminum nut channels.
- C channel/Side track channel
- Hat channel
- Nut channel
- Z channel