Wireline Coring Drill Rig, Type HCDU-5

Wireline Coring Drill Rig, Type HCDU-5
Request a Quote
Introductions

Wireline coring drill rig, type HCDU-5 is applicable in wireline coring diamond drilling techniques. It is developed independently by us on the basis of similar equipment for the purpose of wireline coring diamond drilling. Besides, it is a geological equipment suitable for use in medium-deep hole coring drill.

Parameters
Basic parameters Drilling depth BC(55.6mm)1800(m) NC(69.9mm)1500(m) HC(88.9mm)1000(m)
Model of diesel motor Cummins 6BTA5.9-C180 5.9L/6 cylinder turbocharged water-cooled
Power / rated rotational speed 132kw/2200 r/min
Power head 1st gear (rotational speed / torque) 0-388 r/min /3600-1800Nm
2nd gear (rotational speed / torque) 0-1240 r/min /1100-550Nm
Main spindle diameter φ95mm
Speed adjustment method Variable speed motor and final gear transmission to adjust the speed
Hydraulic chuck Structure type Spring clamping, hydraulic opening
Clamping force 200kN
Number of slips 5(detachable)
Feeding system Spindle stroke 3300mm
Feeding force 45kN
Pulling force 125kN
Mast swing angle 90-45 degree
Height of the drill-pipe stands 3m×2
Hydraulic system Flow of main pump/ pressure 156L/min 28Mpa
Main winch High gear low gear
Single-rope pulling force 83kN 128kN
Lifting speed 53m/min 34m/min
Rope capacity 45m(φ24mm steel rope)
First layer rope speed 110m/min
Most external layer rope speed 443m/min
Rope capacity 1800m(φ5mm steel rope)
Crawler track Speed 2-4km/h Gradeability 0 degree-20degree
Leveling device 4 hydraulic outriggers
Mud pump BW160/10 high pressure mud pump
Overall weight of whole machine 9t
External dimensions (L×W×H) 4100×2200×10360mm
Dimensions of the machine during transportation (L×W×H) 5400×2200×2300mm
Features
  • Large lifting ability of the main winch, high gear lifting force reaching single rope 8.3 tons, maximum lifting force reaching 12 tons.
  • Large pulling force of the feeding cylinder, the speed adjustment and pressure control integrated together in the feeding system, maximum feeding pulling force reaching 12.5 tons.
  • Wide range of adjustment of the rotary speed, integration of mechanical and hydraulic speed control, maximum speed reaching 1240rpm.
  • Reasonable overall layout, the mast is arranged along the axis of the drill, the stable performance of the machine is enhanced.
  • Long spindle stroke which increases the drilling efficiency in the meantime reducing the occurrence of accidents in the drilling works.
  • Adopt modular design and hence easy to be shifted and easier to be selected to suit our customers' preference.
Related products
Send Message
Other Products
Inquiry
Inquiry