Threaded Flange
Threaded flange has its inner bore surface designed as tubular thread, which matches with threaded pipe to achieve connection. Therefore, no welding is required. Compared with slip-on welding or welding neck flanges, it features easier installation and more convenient maintenance. The flange can be applied in situations where welding is forbidden. When it comes to alloy steel flange, which has enough strength but poor welding performance, users can choose threaded flange as well. To avoid leakage, it is not recommended for pipelines involving dramatic temperature change and occasions with temperature lower than -45℃ or higher than 260℃.
Available Sizes
3/8"- 12", DN10-DN300
Standards
GB/T9112-2000, GB/T9114-2000, GB/T9124-2000
SH/T3406-1996
HG/T20592-2009, HG/T20614-2009, HG/T20615-2009, HG/T20623-2009, HG/T20635-2009
ASME B16.5-2009
EN1092-1-2007, EN1759-1-2004
DIN2566
BS1560-3.1-1989, BS4504-3.1-1989
AFNOR NF E29-200-1-2007
ISO7005-1-1992
JIS B2220-2004
Raw Materials
Carbon steel: A105
Alloy steel: A182 F 1-F 2-F 5-F 9-F 10-F 91-F 92-F 122-F 911-F 11-F 12-F 21-F 22
Stainless steel: A182 304-304H-304L-304N-304LN 316-316H-316L-316N-316LN 321-321H 347-347H
Low-temperature steel: A522 A707 Grade L 1-L 2-L 3-L 4-L 5-L 6-L 7-L 8
High-performance steel: A694 F 42-F 46-F 48-F 50-F 52-F 56-F 60-F 65-F 7
Pressure Grade
American System: CLASS 150, CLASS 300, CLASS 400, CLASS 600, CLASS 900, CLASS 1500, CLASS 2500
European System: PN 6, PN10, PN 16, PN 25, PN 40, PN 63, PN 100
Flange Facing
American System: Flat Face (FF), Raised Face (RF)
European System: Flat Face, Raised Face
Producing Process
Cutting of Raw Material --- Die Forging --- Machining
Application
The flange is widely used in many areas such as power generation plant, petroleum industry, natural gas system, chemical industry, shipbuilding industry, heating system, paper-making industry, metallurgy industry, etc.
