Carbon Steel Elbow Pipe Fittings (45° Elbow, 90° Elbow, 180° Elbow)
Carbon steel elbow pipe fittings are usually used to connect two lengths of pipe to redirect the fluid flow direction. Besides 45°, 90°and 180°elbow, our company is also fully capable of manufacturing elbows of any customized angle, thus fulfilling various requirements for direction change.
Sample Exhibition 1. Large Diameter Carbon Steel Elbow Pipe FittingsThrough steel plate compression-molding process, we are also able to produce carbon steel elbow pipe fittings with large diameters, such as 100 inch(DN2500), if customers need. Furthermore, our whole set of compression moulds of all kinds of dimensions enable us to provide carbon steel elbows with various sizes according to customers’ requirements.
- Hot forming carbon steel elbow
- Hot forming carbon steel elbow
- Hot forming carbon steel elbow
Through steel plate compression-molding process, we are also able to produce carbon steel elbow pipe fittings with large diameters, such as 100 inch(DN2500), if customers need. Furthermore, our whole set of compression moulds of all kinds of dimensions enable us to provide carbon steel elbows with various sizes according to customers’ requirements.
- Carbon steel elbow
- Large size butt welding elbow
- Large size carbon steel elbow
Despite of corrosion resistance not as good as stainless steel, carbon steel has many significant advantages, such as low cost, great processability and easiness of smelting. Hence, it has always been one of the most widely applied materials for manufacturing of pipe fittings used in various pipe systems.
Our carbon steel elbow pipe fittings are mainly used for connection of pipe to convey oil and gas in power plants and industries of shipbuilding and petrochemical engineering.
Custom Range| Parameters | DN15-DN2500 (1/2"-100") |
| Bending radius (R) | 1D, 1.5D, 2D, 3D, etc |
| Wall thickness | Conventional wall thickness range: Sch 5s to Sch XXS Maximum wall thickness: 100mm |
| Standard | ASME B16.9, MSS-SP-75, AWWA C208, DIN2605, DIN EN10253, JIS B2312, JIS B2313, GB/T13401, GB/T12459, GB/T27684, SH3408, SH3409, GOST17375, DL/T515, SY/T5257, etc. |
