MIG/MMA Welder / Inverter Welder

MIG/MMA Welder / Inverter Welder
MIG/MMA Welder / Inverter Welder
MIG/MMA Welder / Inverter Welder
MIG/MMA Welder / Inverter Welder
MIG/MMA Welder / Inverter Welder
MIG/MMA Welder / Inverter Welder
MIG/MMA Welder / Inverter Welder
MIG/MMA Welder / Inverter Welder
MIG/MMA Welder / Inverter Welder
MIG/MMA Welder / Inverter Welder
MIG/MMA Welder / Inverter Welder
MIG/MMA Welder / Inverter Welder
MIG/MMA Welder / Inverter Welder
MIG/MMA Welder / Inverter Welder
Request a Quote

MIG 200E

Features
  • Equipped with RILAND’s self-developed RICHI chip and use the advanced IGBT inverter technology;
  • Available to 5kg flux-cored self-shield wire, actually welding without gas and add hand welding function;
  • Synergy, greatly reduce difficult to adjustment, especially for new welding operator;
  • Stable welding performance on small current around 40A, enhancing the capacity to weld thinner metal and 0.8mm sheet, spot welded without perforation;
  • Lower spatter than that of general flux-cored welding machine;
  • Wire inching function act as you press the trigger about 3s under no load;
  • Fan as needed, reduce noise and dust inside the machine;
  • Intelligent protection: over-current, over-voltage, over heating protection;

Specifications
Model MIG 200E (V1B3)
Input voltage (V) 1P/220V (±15%)
Frequency (Hz) 50/60
No-load voltage (V) 55
Rated input current (A) 23.7 (MIG) 22.7 (MMA)
Output current adjusting range (A) 60 - 140 (MIG) 50 - 120 (MMA)
Output voltage (V) 17 - 21 (MIG) 22 - 24.8 (MMA)
Duty cycle 15%
Power factor ≥0.62
Efficiency ≥81%
Type of wire feeder Internal
Welding wire diameter (mm) 0.8/1.0
Insulation class Class F
Protection grade IP21
Net weight (kg) 5.5
Dimensions (L×W×H) (mm) 401×176×260

Package Included
  • MIG welding torch, 1pc
  • Welding cable quick connector, 1pc
  • Ground clamp & cable assembly, 1 set
  • Allen key, 1pc
Applications
Optional Welding Accessories
Related products
Send Message
Other Products
Inquiry
Inquiry