MIG MMA Welding Machine, IGBT Inverter Welder Manufacturer

MIG MMA Welding Machine, IGBT Inverter Welder

Request a Quote

View All: http://inverter-welder.com/2-10-mig-mma-welder-mig-350i.html

MIG200GW

Main Parameters
Applicable Welding Wire Diameter: 0.6/0.8/0.9/1.0/1.2mm (MIG mode), 1.6-5mm (MMA mode)
Applicable Power Supply: Single Phase/Three phase
Rated Input Voltage: 110V/220V/380V
Rated Input Power: 3.3kW-12kW
Rated Input Current: 15.3A-58.4A
Open Circuit Voltage: 55V/60V/61V
Protection Class: IP23
Insulation Class: H
Cooling System: Forced air cooling

Our MIG200/250/280/315GW series IGBT inverter MIG welding machine is designed with an exposed wire reel, thus ensuring an easy operation. It also features high welding efficiency, energy conservation and great durability. The welding machine can work in MMA welding mode or MIG welding mode. It is often applied for welding carbon steel, ordinary low alloy steel and stainless steel.

Features

The ability to continuously carry out loading at a high frequency allows the MIG welding machine to better accommodate industrial applications.
The welding machine features an excellent dust prevention, water resistance, and corrosion resistance and protection class of IP23, significantly enhancing the machine service life.
When the working voltage or current is too high or the welding machine is over heated, the overheat protection, overcurrent protection and low voltage protection features will be automatically used, thus ensuring operation safety.
Both regular 2T and semi-automatic 4T modes are supported, accommodating different operating habits. In 2T mode, the operator will need to hold the switch down during the entire cutting process. Once the switch is released, cutting stops. In 4T mode, the operator simply needs to toggle the switch on, let go and then cut and toggle it off when finished.
In MMA welding mode, a LIFT TIG contact type arc striking is used. The arc striking is done through direct contact between the tungsten electrode and the workpiece, resulting in a short circuit. As a result, the arc will be easily struck, resulting in a soft arc.
Welding parameters such as current and voltage will be visually displayed on the digital panel, where they can also be adjusted.

Technical Parameters

Model	MIG200GW-1		MIG200GW-2		MIG250GW		MIG280GW		MIG315GW
Wire Diameter	0.6/0.8/0.9mm	1.6-3.2mm	0.6/0.8/0.9mm	1.6-4mm	0.8/0.9/1.0mm	1.6-4mm	0.8/1.0/1.2mm	1.6-5mm	0.8/1.0/1.2mm	1.6-5mm
Rated Input Voltage	1P 110V		1P 220V		1P 220V		3P 380V		3P 380V
Frequency	50/60Hz		50/60Hz		50/60Hz		50/60Hz		50/60Hz
Welding Mode	MIG	MMA	MIG	MMA	MIG	MMA	MIG	MMA	MIG	MMA
Rated Input Power	3.3KW	3.7KW	6KW	5.3KW	8.3KW	9.4KW	9.2KW	10.3KW	11KW	12KW
Rated Input Current	41.5A	46A	37.4A	33A	51.6A	58.4A	15.3A	17A	18A	20A
Welding Current Range	40-130A	40-120A	40-200A	40-160A	40-250A		50-280A		50-315A	50-300A
Welding Voltage Range	15-30V		15-30V		14-28V		14-30V		14-32V
Duty Cycle (25°C 10min)	60%130A, 100%100A	60%120A, 100%90A	60%200A 100%155A	60%160A 100%124A	60%250A, 100%194A		60%280A, 100%217A		60%315A, 100%244A	60%300A, 100%232A
Open Circuit Voltage	55V				61V		60V		60V
Efficiency	≥80%		≥80%		≥80%		≥85%		≥85%
Power Factor	0.73		0.73		0.73		0.93		0.93
Protection Class	Ip23		Ip23		Ip23		Ip23		Ip23
Insulation Class	H		H		H		H		H
Cooling System	AF		AF		AF		AF		AF
N.W	21KG		21KG		25KG		25.5KG		25.5KG
G.W.	28KG		28KG		31.5KG		32.0KG		32.0KG
Packing Dimension	705×325×490mm		705×325×490mm		675×355×725mm		675×355×725mm		675×355×725mm

Customization
The appearance, welding current, product manuals and package of our MIG welding machine can be customized according to customer requirements.

Accessories

Electrode Holder
Earth Clamp
Mask
Hammer Brush
PU Tubing
Wrench