The drive through bus wash system with 5 brushes (CB-750) features a PLC fully-automatic computer system to improve the security and high pressure water system, which increases the washing speed. The bus system washes both buses and trucks using 4 lateral brushes and 1 overhead brush. Further details are shown in the table below.
| Bus truck wash machine CB-750 | |
| Overall dimension | 7420*5400*4400mm or 7420*5400*5500mm |
| Installation size | 8500*6000mm |
| Air source | Air pressure: 0.75-0.9MPa (7.5-9kg/cm2) |
| Voltage | 380V, 50Hz (5-wire system) |
| Water supply | Pipe diameter: DN25, water flow ≥120L/min |
| Ground flatness | Deviation≤10mm |
| Normal washing method | Drive through type |
| Available car to wash | Container, container truck, bus truck |
| Car washing dimension | ≤3000*≤2800*≤3500mm or ≤3000*≤3900≤4400mm |
| Bus washing capacity | 25-30 cars/hour |
| Water consumption | 180-240L/car |
| Power consumption | 0.15-0.25kW/car |
| Shampoo consumption | 20-25ml |
| Long vertical brushes | 2 |
| Short vertical brushes | 2 |
| Top brush | 1 |
| Frame | Hot-dipped galvanized steel frame |
| Brush and pipe material | Alloy steel pipe, integral nylon brush/foam brush |
| Side brush motor | SITI from Italy |
| Driving motor | SITI from Italy |
| Water pump | Youli |
| Intelligent device data | Management, checking, operation |
| Self-diagnosis | Available |
SITI motor performs well in terms of water-proofing and service life.
5 brushes of Risense’s bus wash system are made of imported 4th generation of foam or nylons. They thus have the advantage of softness, gentleness and cleanness. Its capacity to retain water optimizes the washing performance.
