Automatic Foot Operated Seam Welder
Request a Quote
The automatic foot operated seam welder is operated under microprocessor precision control and can complete vertical and horizontal welds to improve productivity. The welder is widely used for the seal welding of tanks or cans produced from low carbon steel and stainless steel. This welding equipment adopts pneumatic clamp cylinders to maintain high welding accuracy.
Features
- The two-phase electrical power makes appropriate changes to the current waveform to enhance the pre-heating and welding quality of metal materials.
- DRS-Ⅲ microprocessor-based resistance welding control and modular circuit monitoring system are used in machine parameter settings and adjustment.
- Variable-frequency drive maintains strong anti-interfere ability to guarantee the welding process stability
- Microcomputer control adopts the charging mode of constant current and constant voltage to ensure the welding quality under different variations of grid voltage.
- Manual feeding, automatic welding, manual discharge
- Vertical and horizontal welding are adopted
- Optional accessories and functions: copper bearing, silver bearing, hypoid gear correction
Parameter
Model | FN-80 | FN-100 | FN-150 | |
Item | Unit | |||
Rated voltage | V | 380 | ||
Rated frequency | HZ | 50/60 | ||
Rated capacity | KVA | 80 | 100 | 150 |
Rated duty cycle | % | 20 | ||
Insulation class | B | |||
Maximum secondary short circuit current | A | 16000 | 18000 | 21000 |
Maximum welding power | KVA | 120 | 150 | 200 |
Maximum pressure | N | 6100 | 6100 | 10000 |
Maximum welding ability | low-carbon steel mm | 1.5+1.5 | 1.8+1.8 | 2.0+2.0 |
stainless steel mm | 1.2+1.2 | 1.5+1.5 | 1.5+1.5 | |
Input Air pressure | Mpa | 0.5 | ||
Cooling water flow | L/min | 20 | 20 | 20 |
Control mode | numerical control | |||
Stroke | MM | 100 | 100 | 100 |
Welding speed | M/min | 0.6-3.0 |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos