LJ350B Al Flat Wire & Sector Line
Continuous Extrusion Machine for Aluminum Strip and Flat Bar
The LJ350B continuous rotary extrusion line is used to produce aluminum busbars and other types of aluminum strips with width below 80mm. These extruded aluminum products are widely used in military, electronics, lithium batteries, air conditioner, packaging, and more industries.
Adopting aluminum rod with diameter between 12 and 15mm as the feedstock, our aluminum strip continuous rotary extrusion equipment enables users to prepare or acquire the blank conveniently and at low cost, thus helping save production cost.
With production capacity of 500kg/h, the continuous rotary extrusion line for aluminum products can satisfy every of your high speed demands.
Main Unit: Continuous Extrusion Equipment | |
Model | LJ350B |
Nominal Diameter of Extrusion Wheel | 350 mm |
Rated Rotation Speed | 16-20 RPM |
Power of Main Motor | 200kW |
Feedstock: Aluminum Rod | |
Diameter | Φ12-15 mm |
Diameter Tolerance | ±0.2mm |
Yield Strength | ≤ 90 MPa |
End Product: Aluminum Busbar and Strips | |
Sectional Area Range | 50-500mm² |
Max. Width | 80mm |
Aluminum Strip Production Line | |
Average Output | 500 kg/h |
Installed Capacity | 380V, 3 phase, 250KVA |
Flash Amount | 1-3% |
Aluminum Rod Payoff Machine | one pcs |
Aluminum Rod Straightening Machine | one pcs |
Scrubbing Machine | one pcs |
Ultrasonic Cleaner | one pcs |
Aluminum Rod Cutter | one pcs |
Continuous Extruder | one pcs |
Cooling System | one set |
Meter Counter | one set |
Dedicated Take-up Machine | two sets |
Electrical Control System (with Touch Screen) | one set |
Hydraulic and Lubricating System | one set |
Ultrahigh Pressure Hydraulic Station | one set |
Continuous Rotary Extrusion Process, Aluminum Extrusion Processing, Aluminum Extrusion Equipment Manufacturer