AC/DC Series Motor, Universal Motor

AC/DC Series Motor, Universal Motor
AC/DC Series Motor, Universal Motor
AC/DC Series Motor, Universal Motor
AC/DC Series Motor, Universal Motor
AC/DC Series Motor, Universal Motor
Request a Quote

Shanbo EM offers universal motors which can be used with either a single phase AC source or a DC source, and can run at a range of 100-240V and 50-60Hz. These universal motors generally come built into hydraulic systems, healthcare devices, power tools, etc.

Motor Selection Range

  • Outer diameter: 86mm, 98mm
  • Voltage: 110VDC (AC), 220VDC (AC)
  • Speed: 8000-12000rpm
  • Torque: 0.3-1.4Nm
  • Protection class: IP2X
  • Operating temperature: -40°C – 70°C

Specifications

  • EM86HC01

    Voltage: 115V AC(60Hz)
    Speed: 11500RPM
    Power: 0.73HP
    Current: 8A
    Working Duty: S2
    Protection Class: IP2X
    Other: F
  • EM86HC02

    Voltage: 220V AC(50Hz)
    Speed: 11500RPM
    Power: 0.73HP
    Current: 4A
    Working Duty: S2
    Protection Class: IP2X
    Other: F
  • EM98HC01

    Voltage: 115AC
    Speed: 11000RPM
    Power: 1.7HP
    Current: 23A
    Working Duty: S2
    Protection Class: IP2X
    Other: F
  • EM98HC02

    Voltage: 230AC
    Speed: 11000RPM
    Power: 1.7HP
    Current: 11A
    Working Duty: S2
    Protection Class: IP2X
    Other: F
  • EM86HC05

    Voltage: 24 DC
    Torque: 2N.m
    Speed: 3800RPM
    Power: 800W
    Current: 42A
    Working Duty: S2
    Protection Class: IP54
    Other: F

Features

  • Easy To Use
    A universal motor can operate on both DC and AC power supplies. The speed of universal motor can be controlled by simply changing the input voltage. Hence, the speed control of universal motor is easily achieved.

  • High Speed, Compact Size, Lightweight, High Output Power
    Unlike other AC motors whose rotation speed can not exceed 3000r/min at frequency of 50Hz, the speed of single-phase series motor is not limited by the supply frequency and it generally ranges between 10000r/min and 30000r/min. The higher the motor speed, the less the ferromagnetic material used, thereby universal motors are relatively lightweight. The weight of single-phase series motor 10000r/min is only half the weight of single-phase asynchronous motor 3000r/min at the same power condition. Here is an example, a customer has requested output power to reach 1.65kW and the outer diameter of motor must be less than 98mm. In this case, only high speed series motor can reach the requirements.

  • High Starting Torque, Good Load Carrying Capacity
    Single-phase series motor features a higher starting torque that is 4 to 6 times of the rated torque, while the starting torque of other single-phase AC motors is approximately 2 times of the rated torque. Therefore, series motors are typically used in power tools without getting stuck, also suited to be used as servo motor to accommodate a heavier starting load, due to its exceptional load carrying capacity.

Related products
Send Message
Other Products
Inquiry
Inquiry