Indoor LED Power Supply, 150W
Request a Quote
Features:
AC input range of the LED power supply is selectable by switch.
Protections: Short circuit/ Overload / Over voltage
Cooling by free air convection
LED indicator on the indoor power supply shows when the power is on.
100% full load burn-in test
High efficiency, long life and high reliability
2 years warranty for the lighting power supply
Technical Specification
| MODEL | PW150-9D-167A-MW | |
| OUTPUT | DC VOLTAGE | 24V |
| RATED CURRENT | 6.5A | |
| CURRENT RANGE | 0~6.5A | |
| RATED POWER | 156W | |
| RIPPLE & NOISE (max.) Note.2 | 120mVp-p | |
| VOLTAGE ADJ. RANGE | 22.8~27.6V | |
| VOLTAGE TOLERANCE Note.3 | ±1.0% | |
| LINE REGULATION Note.4 | ±0.5% | |
| LOAD REGULATION Note.5 | ±0.5% | |
| SETUP, RISE TIME Note.8 | 800ms, 20ms/230VAC 1200ms, 30ms/115VAC | |
| HOLD UP TIME (Typ .) | 24ms/230VAC 20ms/115VAC | |
| INPUT | VOLTAGE RANGE | 90 ~132VAC/180 ~264VAC selected by switch |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| EFFICIENCY (Typ .) | 86% | |
| AC CURRENT (Typ .) | 3A /115VAC 2A/230VAC | |
| INRUSH CURRENT (Typ .) | COLD START 45A/230VAC | |
| LEAKAGE CURRENT | <2mA/240VAC | |
| PROTECTION | OVERLOAD | 110 ~ 150% rated output power |
| Protection type: Hiccup mode, recovers automatically after fault condition is removed | ||
| OVERVOLTAGE | 27.6 ~ 32.4V | |
| Protection type: Hiccup mode, recovers automatically after the cause of fault is removed | ||
| ENVIRONMENT | WORKING TEMP. | -20 ~ 60℃ (Refer to output load derating curve) |
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |
| STORAGE TEMP., HUMIDITY | -40~ 85℃ , 10~95% RH | |
| TEMP. COEFFICIENT | ±0.03%/ ℃ (0 ~ 50℃ ) | |
| VIBRATION | 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X , Y, Z axes | |
| SAFETY & EMC(Note 7) | SAFETY STANDARDS Note.6 | UL60950-1, TUV EN60950-1 , GB4943.1:2011 approved |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC 70% RH | |
| EMI CONDUCTI0N & RADIATION | Compliance to EN55022 (CISPR22) Class B , GB9254 CLASS B | |
| HARMONIC CURRENT | Compliance to EN61000-3-2,-3,GB17625.1 | |
| EMS IMMUNITY | Compliance to EN61000-4-2,3 , 4,5 , 6 , 8,11, ENV50204 , EN55024 , EN61000-6-1, heavy industry level, criteria A | |
| OTHERS | MTBF | 433.3Khrs min. MIL-HDBK-217F (25℃ ) |
| DIMENSION | 199*98*38mm(L*W*H) | |
| PACKING | 0.7Kg ;20pcs/15Kg/0.72CUFT | |
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. | |
| 2. Ripple and noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf and 47uf parallel capacitor. | ||
| 3. Tolerance: includes set up tolerance, line regulation and load regulation. | ||
| 4. Line regulation is measured from low line to high line at rated load. | ||
| 5. Load regulation is measured from 0% to 100% rated load. | ||
| 6. According to GB4943.1 regulations, the power supply is only suitable for use in altitudes 2,000m and below and in non-tropical climates. | ||
| 7. The power supply is considered a separate component which will be installed in the final equipment. The final equipment must confirm that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies.” (as available on http://www.meanwell.com) | ||
| 8. Length of set up time is measured at cold first start. Turning the power supply ON/OFF very quickly may increase the set up time. | ||
Downloads
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
