Flexo Plate Ultrasonic Cleaning Machine
The ultrasonic cleaning machine is used to clean ceramic mesh rollers with water-based cleaner. It consists of ultrasonic tank, ultrasonic transducer, heating plate, temperature control system, electrical control. Featuring high-quality components, the machine is constructed with 2.5mm-thick 304 stainless steel. The ultrasonic cleaner also features advanced ultrasonic frequency conversion circuit, Fm-3 frequency modulation, integrated design, output power module. Apart from these parts, the mesh-roller cleaner is also known for its versatility, such as undervoltage lockout, overcurrent shutdown protection, three-level low-power soft start, automatic frequency tracking, and pointer-type power display.
| Parts In-feed | Ultrasonic Cleaning | Rinsing | Cleaned Parts Out-feed |
| Water drain | 1" |
| Heating power | 1kW |
| Ultrasonic frequency | 40kHz |
| Ultrasonic power | 1800W |
| Structure | |
| Internal dimension | L950 x W220 x H180 mm One roller at a time |
| Internal Material | SUS304# stainless steel Thickness: 2.5mm |
| Surrounding Plate Material | SUS304# stainless steel Thickness: 1mm |
| Exterior material | Stainless steel |
| Caster | 2 sets of 3-inch directional casters (with brakes) 2 sets of 3-inch swivel casters |
| Drainage | 1-inch drain valve |
| Ultrasonic system | |
| 40KHz frequency | TFR-chip-powered and high Q transducer |
| Power | 1800W |
| Generator | 1. 4th generation frequency modulation circuit provides uniform and powerful ultrasonic output with infinitely variable ultrasonic power. 2. Advanced IC circuit technology to shorten cleaning time. 3. Soft start circuit to reduce impact on transducer during start so as to extend its lifespan. 4. New power module greatly enhances safety and reliability of the control box. 5. Unique frequency sweep technique to improve ultrasonic cleaning ability by more than 20%. |
| Heating system | |
| Heater | 1. Electric heating is used for heating cleaner, which is pre-started (approximately 30-60 minutes) before operation. 2. Stainless steel heating tube is located inside the tank, with the power being 1kW |
| Thermostat | The thermostat comes from Rainbow, with the temperature range from 20-90 °C. |
| Driving system | |
| Motor | 120W variable-speed motor Speed: 5-10 rpm |
| Transmission unit | Synchronous belt drives the rubber-coated wheel. One end of the support bracket is fixed for transmission, while the other side can be adjusted in length and height to accommodate mesh roller with different length. |
| Electronic control system Rainbow thermostat, Chint timer, contactor, switch from a well-known brand, indicator | |
| Tank cover SUS304# stainless steel Thickness: 1.5 mm | |
At CBADEN, we supply an extensive range of converting & printing machines and provide comprehensive services to accommodate customer's individual production demands.
