Oil-bleeding Silicone Rubber
Request a Quote
Applications
Due to its characteristics of fast oil bleeding after vulcanization with an appropriate amount, this oil-bleeding silicone rubber is widely applied for the production of automotive parts, bearing seals and other rubber products requiring excellent self-lubricating properties.
Features
- Excellent self-lubricating properties;
- Superior physical properties;
- Good processability;
Approvals
ROHS, REACH, FDA, CA65, EN71-3, EN14372, PAHS, PFOA, CPSIA, etc.
Test
50% DBPMH (2,5-Dimethyl-2,5-di-(tert-butylperoxy) hexane), addition 1%, 175℃×5min×15Mpa
Technical Data
- Model:
HT-8130MY - Appearance: Translucent
- Processability: 200-200
- Hardness (Shore A): 30
- Density (g/cm3): 1.12
- Tensile strength (Mpa): 7
- Elongation (%): 850
- Tear strength (K N/m): 15
- Model:
HT-8140MY - Appearance: Translucent
- Processability: 220-240
- Hardness (Shore A): 40
- Density (g/cm3): 1.13
- Tensile strength (Mpa): 7
- Elongation (%): 750
- Tear strength (K N/m): 20
- Model:
HT-8150MY - Appearance: Translucent
- Processability: 220-240
- Hardness (Shore A): 50
- Density (g/cm3): 1.14
- Tensile strength (Mpa): 7
- Elongation (%): 650
- Tear strength (K N/m): 15
- Model:
HT-8160MY - Appearance: Translucent
- Processability: 230-260
- Hardness (Shore A): 60
- Density (g/cm3): 1.15
- Tensile strength (Mpa): 7
- Elongation (%): 550
- Tear strength (K N/m): 15
- Model:
HT-8170MY - Appearance: Translucent
- Processability: 260-280
- Hardness (Shore A): 70
- Density (g/cm3): 1.2
- Tensile strength (Mpa): 7
- Elongation (%): 450
- Tear strength (K N/m): 15
- Model:
HT-8180MY - Appearance: Translucent
- Processability: 250-280
- Hardness (Shore A): 80
- Density (g/cm3): 1.2
- Tensile strength (Mpa): 7
- Elongation (%): 300
- Tear strength (K N/m): 15
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
